Oil-type injection mold temperature controller Beijing oil-type mold temperature controller Heating temperature mold temperature controller

Oil-type injection mold temperature controller Beijing oil-type mold temperature controller heating temperature mold temperature controller
The working principle of the oil temperature controller is: using electricity as energy source, converting electrical energy into thermal energy through electric heating elements and using organic heat carrier (heat-conducting oil) As a heat transfer medium, the heat transfer oil is forced to circulate in the system through a high-temperature oil pump, causing it to be heated repeatedly, thereby achieving the purpose of continuously obtaining the required heat energy for the thermal equipment and meeting the process temperature set in the production process. and the requirements for high-precision temperature control. Usually the oil temperature machine host (heating body, high-temperature oil pump and oil filter), expansion tank, electric control cabinet, etc. are assembled as a complete set of equipment together with the heating equipment to form a forced liquid phase circulation heating system. If the thermal equipment has special requirements for the cooling process, then the installation of oil and water coolers should be considered in the system. As the name suggests, the oil temperature controller is a mold temperature controller that uses thermal oil as the heat transfer medium. The oil temperature machine itself is equipped with an oil storage tank. During operation, the heat transfer oil enters the system from the oil storage tank, and is driven into the mold or other equipment that requires temperature control through the circulation pump. After the heat transfer oil comes out of the temperature controlled equipment, it returns to the system. What goes around comes around. The heat transfer oil heats up with the heater. When the media temperature detected by the temperature sensor reaches the set value, the heater stops working. When the temperature is lower than the set value, the heater starts to work, and when the temperature reaches the set value, it stops working. And so on.
r, r 'r ': . Product features of ultra-high temperature oil temperature controller (℃):

r, r 'r ': . , computer touch Type control, simple and easy to operate

r, r 'r ': . , microcomputer dual temperature control tables, touch-type internal storage, automatic calculation.

r, r 'r ': . , safety protection and fault indication system.

r, r 'r ': . , components have a long service life.

r, r 'r ': . , fast heating and cooling speed, accurate and stable temperature.

r, r 'r ': . . Unique high-power heating design, suitable for use in different temperature control places, with obvious energy saving effect.

r, r 'r ': . , stainless steel integrated molding, small tube, evenly cooked.

r, r 'r ': . , automatic exhaust function at startup.

r, r 'r ': . , mold return oil temperature detection table.
: , r, .>All mechanical equipment sold by our company has a complete machine warranty
: , r, .>
: , r, .>months, including all electrical components and The so-called consumables, mold temperature machine electrical appliances, temperature control meters, pumps, heating pipes and various self-destructive protection devices are all covered by the warranty.
: , r, .>
: .>Compared with steam boilers, oil temperature controllers are pressure vessels that must be approved and must be reviewed annually. Oil temperature controllers use a piping system for circulating heating, and the oil tank It does not participate in heating, but only functions to replenish oil, and does not belong to the category of pressure vessels. Relatively speaking, the investment cost has been significantly reduced, and the cost of water treatment equipment and special operating personnel has been saved. A large amount of soft water for boilers has been saved, and the discharge of steam condensate has been reduced, especially in water-scarce areas.
r, r 'r ': .