Shijiazhuang Rongxin Technology Co., Ltd. Powder metallurgy automatic batching system

< r>Powder metallurgy automatic batching system
1.
Product introduction:
The system follows the principles of mature technology, good versatility and reliability in the overall design, equipment selection and application process The principle of high sex.
2.
System design plan:
The host of the batching system adopts a touch screen tablet computer operation mode. The technical department can use the keyboard and mouse to perform formula-related operations on the system. The on-site staff can only use the touch screen for production. operate. The batching control system takes each silo as the starting point. The material is powdery. A screw feeder is used under each silo to feed the material to the metering hopper. In order to prevent the silo from being blocked, each is equipped with a stirrer. The parts in contact with the material silo are made of stainless steel. After the batching process is completed, the materials can be automatically discharged to the corresponding container. This system is equipped with a dust collection device to minimize dust pollution.
Each raw material warehouse is equipped with an automatic material level detection device. When the material level reaches the lower limit, it will automatically alarm when the material level reaches the lower limit. This system is designed for fully automatic operation and control. After selecting the relevant formula number, the operator only needs to press the "Start" and "Unload" buttons, and the batching system can automatically control the corresponding screw conveyor of the weighing batching system according to the set formula. Input materials into the weighing hopper to complete automatic batching. To ensure the confidentiality of the formula, the on-site control instrument display screen is individually sealed and provided with a locking device.
3. Raw material inventory management:
Barcode management is used for storage, entry and exit.
, The warehouse follows the first-in-first-out principle (the raw materials that are put into the warehouse first are used when batching). When the principle is violated, batching will not be performed and relevant information will be prompted (manual intervention can be performed at this time, and relevant records will be recorded), and the batching is completed. Afterwards, the system automatically registers the raw materials leaving the warehouse and calculates the current inventory information.
, Inventory adjustment:
, Code complement processing: When the barcode affixed to the raw material packaging is lost or dirty so that the scanner cannot read it, the raw material can be code complemented.
, report function.
4. Equipment technical parameters:
Instrument accuracy:
Measuring accuracy:
Batching accuracy:
This system has been applied in Laizhou Powder Metallurgy Plant
Contact number: