K11 polymer cement waterproof slurry universal type

产地：

江苏

1. Product Introduction Bolong R waterproof coating series is a high-efficiency waterproof material designed for different substrates. It is a cement-based waterproof coating modified by acrylic high polymer. This product is matched with dry powder agent) and liquid additive B). After mixing, a chemical reaction occurs to form a tough elastic waterproof layer. This layer has good adhesion to the base surface and can form a tight, firm and permanent bond with it. And it can inhibit the growth of mold and prevent salt pollution.
2. Main features
It can be constructed on wet base surfaces, and the waterproof layer has high mechanical strength and good wear resistance.
The coating can prevent moisture and salt pollution and inhibit the growth of mold.
The concrete can still remain breathable. Since this product is cement-based, ceramic tiles, mosaics, etc. can be directly laid on the waterproof layer.
This product has two appearances: white and gray.
3. Scope of application:
Used for indoor and outdoor cement concrete building structures, prefabricated concrete structures, cement plasters and brick walls and other base surfaces.
, underground parking lanes, underground tunnels, water supply and drainage pipes, floor walls and floors.
This product is non-toxic and harmless and can be directly used in drinking water reservoirs, swimming pools, fish ponds, etc.
This product is also suitable for various waterproofing projects on the front or back water surfaces.
4. Construction requirements:
The base must be clean, solid, flat, dry, ash-free, and sand-free.
Pour the liquid into the prepared container in proportion, then add the powder into the liquid in proportion and stir thoroughly until the liquid and powder are dissolved.
Use a roller, gunite machine or brush to roll or spray the mixed slurry evenly onto the cement base surface. The coating should be applied all over and the coating thickness should be applied according to the design requirements.
The order of coating is to apply approximately 100% after the first coat, then apply the third coat in a direction perpendicular to the °C angle after the coating is dry, and so on.
After the construction is completed, it is forbidden to step on it within an hour. After it is completely dry, other covering layers (such as plastering, tiling, mosaic, etc.) can be applied.
5. Technical indicators: Implementation standards: /
Serial number b:
Inspection item b:
Type b:
Type
b:
Tensile strengthb:
.b:
.
b:
Elongation at breakb:
b:
b:
Impermeable Properties b:
. , Waterproof b:
. , Waterproof
b:
Drying timeb:
Explicit drying timeb:
b:
6. Packaging, storage and transportation:
Liquid materials must be stored in a cool place above ℃, and powder materials should be stored in a dry place. Pay attention to moisture, sun and rain protection. The shelf life of this product is one year.
. The liquid of this product is packed in plastic barrels, and the powder is packed in plastic-lined bags.
, This product is / set (kg powder + kg liquid).
7. Reference dosage and proportion:
When the thickness of the waterproof layer is .㎜, the dosage is about .㎏/㎡ (total amount of powder + liquid material) mixing ratio ㎏: .㎏
Storage method : Stored in a cool and dry place, unopened product can be stored for one year.
Packaging specifications (two components):
Type: powder + additive (large component) powder + additive (medium component) powder + additive (small component)
Type : Powder + additive (large component) powder + additive (medium component) powder + additive (small component)