1/4 fan nozzle, HVV nozzle HV nozzle

Introduction to fan-shaped nozzles: The characteristic of the integrated universal metal fan-shaped nozzle is that it can produce high-impact liquid column or fan-shaped spray. The spray angles are optional. The spray produced by this type of nozzle is evenly distributed and the droplet size is small. To medium, when several nozzles are required to produce overlapping sprays, the specially characterized tapered spray edges provide an even distribution of spray coverage area. The nozzle holes are made with fine craftsmanship to precisely control the flow rate, and the nozzles are grooved to prevent damage. The He series metal fan-shaped nozzles have a flow rate of less than 1 liter per minute at bar pressure. The He type nozzles have a rated flow rate of 1 liter per minute or more under bar pressure and have an external pipe thread interface. Type nozzles have the same performance as standard nozzles with a tungsten carbide inlay, providing optimal wear resistance. Type or B (outer) nozzles feature hardened stainless steel construction for long wear life and accurate flow control. It is designed for pressure washing applications. It produces a fan-shaped spray with bubbles under low pressure and produces a fan-shaped spray with the same high impact as a standard nozzle under high pressure. Generally available in three materials: plastic, metal and embedded ceramic.
General applications: ultrasonic cleaning, pre-treatment cleaning, high-pressure flushing, cooling and quenching, spray lubricant, dust pressure control, other surface cleaning processes
The spray channel is large and smooth, reducing clogging. The spray shape is a fan shape with various angles. Due to the influence of the earth's gravity, there will be an edge effect, that is, the fan-shaped profile of the spray produces a gradually tapering edge. The spray particles are fine and uniform, and the spray particles are medium in size. When multiple nozzles are arranged, it is necessary to There is %~% overlap to make the arrangement even in the entire direction. It can produce fan-shaped sprays at various angles. The spray water flow is uniform, and the droplets are of medium size. It adopts a modular connection method for easy installation and replacement. A filter can be added for easy cleaning. Can be installed or replaced on most duct systems. Nozzles are available with or B (male) thread type. Typically, inch-inch nozzles can be made of silicon carbide, silicon carbide, or silicon carbide materials respectively. Stainless steel (,,,,), brass (B, silicon carbide, plastic (, B,), ceramics and other materials.
< >Narrow-angle nozzle, wide-angle nozzle, combined fan-shaped nozzle, single fan-shaped nozzle , self-cleaning fan nozzle, flat fan nozzle, dovetail fan nozzle, clip-on fan nozzle, quick-release fan nozzle, side spray fan nozzle, universal fan nozzle.
< >The material is stainless steel (,,, ), brass (B, plastic () and other materials to choose from.
< >The fan-shaped nozzle can thoroughly clean chemical dirt. In many chemical productions, the residual dirt generated during the production process is usually cleaned. and sewage containing chemicals.