Taifeng WC67Y-TF ordinary bending machine cylinder

型号：

WC67Y-TF

Selection instructions: 1. According to the size of the oil inlet and outlet provided by the series of ordinary bending machine hydraulic cylinders, be careful to ensure that there is sufficient working clearance between the slide block of the bending machine and the hydraulic cylinder.
The motor and encoder interfaces connected to the hydraulic cylinder must be consistent with the input and output shafts of the stroke adjustment worm.
. The working stroke of the hydraulic cylinder must be greater than the maximum working stroke of the slider of the bending machine, and cannot be used over the stroke.
The set pressure of the hydraulic system of the bending machine shall not be greater than the allowed rated pressure of the hydraulic cylinder. If you have special needs, please contact our company's technical department.
. The normal operating speed of this series of ordinary bending machine hydraulic cylinders is recommended. When there are specific requirements for the operating speed, please specify it in the ordering technical conditions.
Customers can choose the encoder base or micro switch base according to their needs.
The external connection dimensions of the oil cylinder can be modified according to customer requirements.
Other instructions:
The series of ordinary bending machine hydraulic cylinders can be individually designed and manufactured according to the individual needs of users.
. According to the different slide stroke adjustment methods or structures of ordinary bending machines, our company also has other series of hydraulic cylinders to choose from. For details, please contact our company's technical department.
, the size is the same as the normally open filling valve produced by our company, and can be used with the filling valve.