Year1
- 长宽高：
- 4.5
< r > : >
: .>Please read the instructions carefully before using the button switch functions on the electrical console, and then operate according to the following methods , turn on the power, the power indicator light is on, press the fast button or slow button to prompt the small train to start, the stop button works, the speaker emits music, press the stop button (red), the small train stops running.
: ><:><:>
< r > : >.
: .>When connecting lines, please refer to the wiring diagram in the manual and use
: >
: .>The above
: >b
: .> copper core wire connects the red (
: >+
: .>) and black on the back wall of the console. (
: >
: .>) The two terminals are respectively connected to the sleeper (
: >
: .>) and the electrode (
: > +
: .>), in order to eliminate the unstable vehicle speed caused by poor contact at the track connection, additional wiring should be provided on the sliding contact electrode and the sleeper. The control box should be installed in a dry and ventilated room and well connected.
: ><:><:>
< r > : >.
: .>Track installation method
: ><:><:>
< r >: .>The site where the track is installed should be flat and dry, the slope of the track should be less than five thousandths, and the height difference of the track should be controlled
: >
: .>The sliding contact electrode should be flat and connected to the bakelite board The bolts at should be tightened.
: ><:><:>
WhatsApp
