Chongqing epoxy resin floor paint specializes in treating dust on the ground

Epoxy resin floor 1. Material introduction:
Floor hardener (a wear-resistant material made according to a special formula and proportion and used for the surface layer of concrete floors in industrial plants). Widely used in various light and heavy industrial plants, machinery manufacturing, processing workshops, large supermarkets, cotton textiles, clothing manufacturing plants, warehouses, logistics centers, commercial parking areas, etc.
The floor hardener is made of German technology, including Portland cement, graded wear-resistant aggregates, special admixtures, inorganic toner and other raw materials. The hardener material is a pre-packaged powdery substance. Dry materials are used during construction. The spreading method is directly spread on the fresh concrete surface, so that the material and the concrete slurry are closely combined and evenly penetrated into an integration. After machine operation and lightening, an overall floor surface without delamination is constructed and achieves high strength. , wear-resistant, dense effect.
The floor hardener has been developed and improved by the company in recent years and has been well received by users. Practice has proved that open source hardener is a superior floor material, which has gradually replaced traditional terrazzo and other floor materials, and is the first choice for modern standard industrial factory floors.
Floor hardeners are divided into non-metal aggregate hardeners and metal aggregate hardeners. Product colors include cement color, gray, red, green, yellow, etc.
The product usage (coverage) depends on the requirements and functions of different factory floors. Based on the standard usage, increase the usage appropriately.
Two: Project introduction:
(1) Wear-resistant hardened floor
Surface form: glossy
Floor characteristics: Metal type: extremely wear-resistant, permanently resistant Corrosive, impact resistant, dust reducing, anti-static, non-flammable.
Non-metallic type: has extremely high wear resistance, reduces dust, and has good impact resistance.
Scope of application: Metal type: warehouses, dock loading and unloading areas, garages, parking lots, oil depots, bridge decks, military enterprises, automobile industry, electronics industry, etc.
Non-metal type: warehouses, docks, factories, parking lots, warehouse-style shopping malls, etc.
Construction technology: Plain treatment: Use sandblasting or grinding to create a rough surface, clean it, and fully moisten it with water
Concrete leveling layer: Use concrete with a strength of above and pour cement mortar with a thickness of above or above fine stone concrete
Golden sand layer: first spread the hardener (metallic aggregate or non-metallic aggregate) evenly, let the material fully absorb the water in the concrete, smooth it with a troweling machine and then smooth the remaining Spread the hardener evenly and smooth it. When the concrete is not damaged, smooth it out and polish it
Curing layer: Smooth it out and apply a layer of curing layer immediately after polishing
Construction is completed: no one can enter the building after 1 hour or 10 hours later. Heavy pressure, (according to the standards, the low temperature opening time needs to be appropriately extended)
(2) Concrete sealing and curing agent floor
Applicable places: used for indoor and outdoor emery wear-resistant floors, terrazzo floors, original slurry Finished floor, super flat floor, ordinary cement floor, stone and other base surfaces are suitable for cement-based places such as factory workshops, warehouses, shopping malls and supermarkets, docks, airport runways, bridges, highways and other places.
Functional features: sealed and dust-proof, hardened and wear-resistant, permanent gloss, good anti-aging properties, convenient construction, environmentally friendly process (colorless, odorless), reduced maintenance costs, one-time construction, permanent protection.
Construction method: Clean the surface of the base layer, remove floating ash, oil stains and other substances that are not conducive to bonding. If there are too many potholes in the old base layer, they need to be filled up in advance. Measure the amount of high-penetration sealing curing agent according to the construction area.
Pour the high-penetration sealing curing agent evenly on the ground and allow it to flow and penetrate freely. At the same time, you can use a trowel to gently scrape the entire ground to penetrate evenly. When the penetration reaction of the base surface becomes slippery and thick, moisten the sticky surface with water mist to make it highly The penetrating sealing curing agent continues the penetrating reaction.
Observe the density and penetration of the base surface, and apply the high-penetration sealing curing agent on the ground three times or more.
After the penetration reaction of the base surface is complete (it is better if the surface moisture is not completely dry), use a professional floor cleaning machine to clean the surface and remove excess materials.
. Hours after completion, use a soft-bristled polishing pad to polish the floor surface. It is necessary to use resin polishing discs to polish the base surface multiple times. The longer it is used, the better the gloss will be.
(3) Epoxy resin floor
Surface form: bright mercerized type, anti-slip type
Floor features: seamless anti-pressure, wear-resistant and anti-slip, acid and alkali resistant, mildew-proof and waterproof , easy to clean, simple to maintain, bright appearance, various colors, simple construction and low price.
Scope of application: Clothing factories, printing factories, toy factories, textile factories
Electronic factories, screen printing factories, paper products factories and other non-stressful places
Warehouses and parking lots.
Construction technology: Waterproof treatment: The ground on the first floor must be waterproofed
Plain floor treatment: Polish, repair, and dust removal should be carried out according to the condition of the plain floor
Epoxy primer: Use permeable and attached Focus on rolling one coat of extra strong epoxy primer to enhance surface adhesion
Epoxy soil coating: Apply several coats of soil according to actual needs, and it must be smooth and without holes, without batch knife marks or sanding marks
Epoxy topcoat: Two coats of solvent-based epoxy topcoat or anti-slip topcoat. After completion, the overall surface will be bright and clean, with uniform color and no hollows
Construction is completed: no one can enter the building after 1 hour. The rear can be pressed again. (Based on ℃, the opening time at low temperature needs to be extended appropriately)
Contact person: Tang Min, Tel: br>