Dust-free | Automatic | New | Energy-saving and environmentally friendly Goode glass sandblasting machine manufacturer address

Dust-free automatic new energy-saving and environmentally friendly Goode glass sandblasting machine
[Glass Sandblaster] Operating Procedures:
In the foundry machinery industry, the sandblaster is a frequently used sand treatment equipment. Correct operation of the sandblasting machine is not only necessary for production, but also can extend the service life of the sandblasting machine. Let's take a detailed look at the sandblasting machine operating procedures.
Before starting the sand blasting machine, check whether the vortex chamber observation door is closed properly to prevent materials from rushing out from the vortex chamber observation door and causing danger.
, impeller rotation direction, viewed from the direction of the feed inlet. The impeller should then rotate counterclockwise, or the motor connection should be adjusted.
The starting sequence of the sand blasting machine and conveying equipment is:
Discharging rr sand blasting machine rr feeding
The sand blasting machine must be started without load, and the vibration crusher can only be fed after it is operating normally. material.
The stopping sequence of the sand blasting machine is opposite to the starting sequence.
, particles, materials must be entered strictly according to the regulations. Materials larger than the regulations are prohibited from entering the sand blasting machine. Otherwise, it will cause imbalance of the impeller and excessive wear of the impeller, which may even cause blockage of the impeller channel and the central feeding pipe, causing the sand blasting The machine cannot work normally, and if excessively large pieces of material are found, they should be removed in time.
When stopping the discharge equipment, the feeding should be stopped. Otherwise, the impeller of the sand blasting machine will be crushed and the motor will be burned.
During the operation of the sand blasting machine, there must be no severe vibration or abnormal noise. Otherwise, it should be stopped for inspection.
Mechanical lubrication, add an appropriate amount of grease every time the sand blasting machine works.
Manufacturer address: No. Xingye Road, Xinjiao Industrial Zone, Daliang, Shunde District, Foshan City.
Contact number: