Product Details
.: ' r' r, >(Welcome to contact Manager Weng:)
: . ' r' r, >Construction precautions. Construction should be carried out in accordance with specified requirements. The stone reinforcement materials to be laid should be demoulded. Powder should be stacked and used in order according to the paving direction, and various professional construction tools and molding molds should also be in good working condition.
: . ' r' r , >. The setting of expansion joints must be completed in accordance with the design requirements and within days of laying concrete. The distance should not be greater than 1 meter. The depth of expansion joints is generally about the same as the concrete floor.
: . ' r' r, >. The length of each shift of concrete surface paving should be coordinated with the caiping paving construction and reasonably coordinated. The construction area must be controlled within the team group every day (based on ten hours). Otherwise, the construction quality of the concrete surface layer will be directly affected. The surface treatment must be carried out in accordance with regulations and design requirements. The surface layer must achieve the required flatness, cross slope and width. The quality of the concrete must be consistent in the same project, which is very important for the consistency of the final overall effect.< br/> : . ' r' r, >. The stone strengthening material may agglomerate during transportation and must be crushed by hand before spreading.
: . ' r' r, >. Before pressing, the position and direction of the arrangement and lifting of the molding molds must be studied and formulated in advance to ensure the integrity of the pattern. Lay the first piece of formwork along the loft pattern reference line and press it vertically into the concrete. The constructor can stand on the mold. The weight of the human body is enough to make the mold form texture on the surface of the concrete. If necessary, a special tamping stick for stone molds can be used to press the mold vertically into the construction surface to better press it. Produce clear and realistic patterns. It is very important to master the timing of stamping. A concrete surface that is too wet or too dry will affect the final pattern and effect.
: . ' r' r, >. The stone forming molds must be arranged tightly to prevent the occurrence of double seams. After mold removal, the pressed areas must be inspected and appropriately repaired.
: . ' r' r, >. If you encounter walls, corners or other irregularities during construction, you can use Ruili corner molds (red soft molds ), but when using it, pay attention to the consistency and coordination with the overall pattern.
: . ' r' r, >. The forming mold and corner mold can be reused, but must Prepare a sufficient number of molds (block sets) to improve construction efficiency.
<: : . rbrr ' r' r, >. Stone-forming floor after construction Flat pavement does not require watering for maintenance, but necessary protection work must be done before acceptance and delivery for use.
<: : . rbrr ' r' r, >< Stamped floor Stamped floor. br: : >
Disclaimer
The information/pictures/parameters, etc. displayed on this webpage about【Supply colored floor】are provided by member【Shanghai Chuangshi Industry Co., Ltd (Marketing Department)
】,By Titker Trade Network members 【Shanghai Chuangshi Industry Co., Ltd (Marketing Department)
】is solely responsible for the authenticity, accuracy and legality of the information/pictures/parameters, etc.,Titker Trade Network only provides display services. For your safety, please choose Titker Trade Network for online trading, otherwise Titker Trade Network will not bear any responsibility for this.
If your legitimate rights and interests have been infringed, please contact Titker Trade Network customer service as soon as possible. We will serve you wholeheartedly. Thank you for your attention and support to Titker Trade Network!