- 规格:
- 1200*3000mm
There are many cables laid in the computer room, and the lines are densely intertwined. The computer room wall materials produced by Beijing Shuangda Co., Ltd. are specially processed using electro-galvanized cold-rolled steel plates. The surface is smooth, smooth and bright, and weighs less than its own weight. It is also lighter and thinner than common similar products in terms of thickness and thickness. It can have a better fire prevention effect on fires that often occur due to short circuits in the computer room. Therefore, fireproof wall panels, floors and fire doors should be used in the computer room passages. Special equipment for computer room. The spraying process on the surface of the steel plate adopts fully automatic rotating mist spraying technology, which makes the thickness of the surface paint film uniform and larger than microns, ensuring that the surface of the product is smooth and smooth without color difference, and is much more beautiful than similar products. Secondly, the wall The insulation performance of the board is also exciting. The surface coating itself contains sufficient anti-conductive materials, which enables the adjustability of the conductivity value of the wall and can completely and effectively dissipate static charges. High-tech technology reduces its surface resistance. The value is controlled within the range of the power of ohms, so that the charge decay time is below seconds, ensuring the anti-static performance of the product and providing a safe and reliable barrier for users. At the same time, the coating hardness of the computer room wall panels complies with the relevant regulations in / Effectively ensure that the product has the characteristics of dustproof, electricity proof and acid and alkali corrosion resistance. The glossiness of the wall panel coating meets the strict standards of /, and the double large fireproof and anti-static shielding wall panels also have strong impact resistance. The product has been strictly tested by the Comprehensive Building Laboratory’s impact test, and the measured impact resistance value of the product is /㎡. During the test, a kilogram weight was used to impact the product, and the product structure was intact. This fully demonstrated the impact resistance of the product and also verified the quality of Shuangda's products.