Year1
- 外观：
- 无色透明液体
- 气味：
- 无特殊气味
- 比重：
- 1.4
Muzhibao concentrated fiberboard softener can be used to soften and modify fiberboards (medium density or low density boards) with a thickness of less than 1 cm before molding. The treated fiberboards have good softening It is stretchable and does not change the original strength and color of the fiberboard. Muzhibao concentrated fiberboard softener is non-toxic and odorless. It is easy to operate and can be treated by brushing, spraying and soaking according to the density of the fiberboard. It has a series of advantages such as high softening efficiency, low fiber expansion coefficient, no cracks in the softened stretching area, and not easy to deform after softening. It is widely used in the production of molded fiber door panels with concave and convex textures, molded fiber door panels with wood veneer, melamine molded door panels, bedside fiberboard decorative panels, and car interior parts with concave and convex patterns and other heterogeneous furniture panels.
Physical and chemical properties of the product
Appearance is colorless and transparent liquid
Value
Specific gravity
Odorless
Active ingredients
Solubility properties Easily soluble in water
br/> Thermal decomposition temperature
Chemical composition oxygen-based modified mixture
Two scopes of application
Muzhibao concentrated fiberboard softener is mainly suitable for fiberboards with a thickness of less than 1 cm (medium density or low density). Board) softening and modification treatment is widely used in the production of molded fiber door panels with concave and convex textures, molded fiber door panels with wood veneer, molded door panels, melamine molded door panels, bedside fiberboard decorative panels, and car interior parts with concave and convex patterns and other heterogeneous furniture panels.
Three usage methods
Routinely use soaking method, brushing method and spraying method
For soaking method, it is recommended to directly dilute Muzhibao concentrated fiberboard softener and industrial alcohol into a concentrated aqueous solution and then soak it . Soaking time is minutes
For the painting method, it is recommended to dilute Muzhibao concentrated fiberboard softener and industrial alcohol into a concentrated aqueous solution and then apply it to the square meter area
When spraying with a sprayer, it is recommended to use Muzhibao After diluting the concentrated fiberboard softener and industrial alcohol into a concentrated aqueous solution, please move it to an outdoor ventilated place for spraying area square
Four Precautions
If you are softening fiberboard products that require a high expansion coefficient, it is recommended that you Do not dilute with water to avoid swelling and degumming of the density board
After concave and convex molding of the melamine veneer molded density door panels, pay attention to the cold pressing and shaping process after molding to avoid internal buckles after molding
The fiberboards with thickness above are painted. When treating with the spray method, it is recommended to treat both the front and back sides to ensure complete penetration of the softener
When using a sprayer to spray, please move to an outdoor ventilated place to operate
In case of accidental drinking, drink plenty of water. If you have forced vomiting, you should go to the hospital
Valid period of use is months
WhatsApp
