Supply putty powder mixer | dry powder mixing mixer equipment

Warm reminder: Product prices include motors, please contact Wangwang or call us for details!
The dry powder mixer produced by Henan Libo Mining Machinery Co., Ltd. is a new mixing equipment designed by the Provincial Machinery Design Institute.
Henan Libo Machinery Equipment Co., Ltd. produces a series of dry powder mixing equipment and a complete production line. The dry powder mortar mixing and mixing production line is suitable for mixing dry powder mortar, putty powder, coating, wear-resistant flooring materials and other materials. The advantages of this equipment are low price, simple and fast packaging, and it can realize continuous production of the main machine and increase the output more than the original basis.
Dry powder mixer product introduction
The dry powder mixer developed and produced by Henan Libo Company has a higher utilization rate than other models on the market. The machine operates smoothly, mixes evenly, has small residual volume, is convenient for clearance, has high output, has no splashing dust, is small in noise, is easy to operate, and is simple to maintain. It is a versatile dry powder mixing equipment with a wide range of uses and can achieve good mixing effects for powders and liquids. Purpose: Produce various dry powder mortars, mortar king, interior and exterior wall putty powder, stucco, gypsum, tile adhesives, caulking agents, and can also be used to produce cement mortars and mix paste materials.
2
Dry powder mixer
Advantages of dry powder mixer
Maneuverable, flexible and multi-functional, convenient for moving and relocation, it saves you high transportation costs and greatly improves the profit margin and enhances the competitiveness of the product.
Three
Dry powder mixer
Working principle
The materials of various ingredients enter the dry powder mortar mixer after being measured according to the formula proportion. The materials are mixed under the push of the ribbon-shaped spiral blades. The mixer structure of the putty powder mixer is designed as an inner and outer three-layer spiral blade mixer. When the mixer is working, the inner and outer spirals drive the materials in the barrel to turn. The inner spiral drives the materials near the axis to rotate and turn from the inside to both sides. The materials are pushed into the barrel. The spiral outside the wall drives the material close to the cylinder wall to rotate around the axis. The material is pushed axially from both sides to the inside and is pushed to the inside to gather. The spiral belt mixer turns the material within the maximum range in the cylinder. The material convection circulates in the cylinder, shears, permeates and mixes to complete the material. Mix quickly and evenly in a short time.
Four
Technical Parameters of Dry Powder Mixer

Project