Gulai gold porcelain glue

Gulaijin Porcelain Glue
The double installation is developed by introducing advanced German technology and special equipment from the United States and using high-tech new polymer imported materials. The cost product uses a unique Swiss plastic bottle container to match the static The mixing nozzle uses the extrusion force of the glue gun to fully mix the colloid and solidify it into shape. After forming, it can achieve the effect of being as hard as porcelain and having good gloss. And it has many advantages such as non-shrinkage, mildew-proof, black-proof, anti-fouling and wear-resistant, convenient construction, high-strength bonding, aesthetic appearance, environmental protection and formaldehyde-free. It also extends the use time and has a once-and-for-all effect. Compared with the ordinary two-component caulking agent on the market, Gulaijin porcelain glue is easier to operate and does not require glue adjustment. It is brighter, stronger and does not fade or fall off! An indescribable overwhelming advantage! Truly achieve a century-old effect.
Specifications/Support
Product Features
It has waterproof, mildew, antibacterial and sealing properties.
After curing, high-strength bonding is as hard as steel, bright as jade, and never deforms.
The construction is simple and fast. Use the double-tube glue gun to squeeze and automatically mix and inject glue evenly.
The edge sealing facility can be activated after three hours of curing.
Application Scope
Special glue for caulking, waterproofing and edge sealing of kitchen and bathroom facilities, sanitary ware, floors and walls
Special glue for quartz stone, natural stone, artificial stone, stainless steel, kitchen and bathroom countertops and back water curved surfaces.
Instructions for use
First install the special glue nozzle and then put on the special high-quality labor-saving glue gun. Before the glue nozzle comes out, let the glue nozzle face upward to make the glue fully mixed in the middle part of the glue nozzle. Glue can be applied later.
Instructions for use of gold porcelain glue construction technology
Clean the gaps, remove the dirt on the construction surface, loose layer of dust, and stick masking paper on both sides of the gaps.
Set the seam width and apply masking tape.
Use a squeeze glue gun to seal the gap.
After applying glue for an hour, carefully tear off the masking paper, remove the surrounding colloid, wipe off the remaining material, and polish the surface of the ceramic tile. The colloid must not be touched before the initial curing hour.
Notes
After the colloid comes out of the static mixing tube, squeeze out a small section and discard it before applying glue.
The unused colloid in the static mixing tube will slowly solidify after the usable time is exceeded. It will not be easy to squeeze out. If you squeeze hard, it will easily cause damage to the glue gun. If you want to continue using it, you need to replace it with a new static mixing tube. .
The unused glue can be saved together with the gradually solidified static mixing tube for the next time it is used, and then the new static mixing tube can be replaced and continued to be used.
Gold porcelain glue dosage reference table
Ceramic tile specifications, construction area per stick㎡
Ceramic tile specifications
Construction area per stick,㎡
*
*
*
*
*
*
*
*
*
Mosaic
*
*
The product is stored under normal temperature storage conditions and its shelf life is one month from the date of production.