Guangzhou Yuexiu District soft film ceiling, flexible ceiling, uv soft film ceiling

Guangzhou Yuexiu District Soft Film Ceiling Flexible Ceiling Soft Film Ceiling Manager Zhang Mobile Phone
Engineering Consulting
Do you know the soft film ceiling construction technology? Let us answer it for you. Soft film ceiling construction technology Construction preparation - keel chassis installation - keel installation - soft film installation - opening treatment Wave-shaped, arc-shaped, dome-shaped and trumpet-shaped shapes are used for various flat road surface shapes and the edge closing of each soft membrane. The width, height, and width of the yard are connected to the chassis. If the chassis is made of wood, a wide and thick wooden keel should be used to tighten the chassis with self-tapping screws. If a square pipe is used, the general specifications should be used. Regardless of whether it is a wooden or square pipe, it must be fixed on the concrete wall so that it does not fall off. For special-shaped ceilings, the bottom frame is first made into a special-shaped pattern at the position where the code keels are installed. The code keels are only installed at the closing position of each piece. First, fix the wooden square on the surrounding cement wall and then fix the yard on the wooden square.
The flat code keel base frame is made of flat codes that can be bent laterally and are suitable for special shapes such as circular arc walls and wrapped columns, and are suitable for installation along the wall. The width and height of the flat code are connected to the bottom frame. If the wall is made of wooden plywood, it can be directly fixed with flat keels. There is no need to build a bottom frame, but the position where the flat keels are fixed must be wooden plywood or square pipes. When installing the flat code, the distance between the screws fixing the flat code should not exceed. This can avoid light leakage at the edge when the built-in light tube is used. If light leakage occurs at the edge of the flat code, just seal it with sealant of the same color.
The double-button code keel chassis is made of double-button code, which can be bent longitudinally and can be made into wavy, arc-shaped, dome-shaped, trumpet-shaped and other shapes, and can be used in various flat pavement shapes and between soft membranes. connect. The double buckle code is connected to the bottom frame with wide and high width. The cross-section size of the double-button code chassis is made of wood. If a square tube is used, the square tube surface and the double-button code surface are fastened with rivets. The function of the double buckle code is to connect two pieces of soft film to create a shape according to the drawing. There are two ways to hoist double-button codes, one is to use booms and the other is to use word supports.
The double-button coded keel chassis is made with clear codes and cannot be bent. The characteristic is that there are no joints with other keels and is suitable for various flat surfaces.