Aluminum substrate LED light strip depaneling machine

长：

2600

宽：

400

高：

240

: >
: : >Using a unique cutting method, circuit board cutting is completed by six blades, with the upper and lower blades forming a set to form a cutting unit.
<: : >: >are respectively
: >
: >,
: >B
: >,
: >
: >, three groups.
<: : >: >The entire cutting process is divided into three stages,
: >
: >The set of blades cuts the circuit board first
: >%
: > , then
: >B
: >the blade runs over the
: >
: >slot where the blade has cut
<: : >: >, again Complete
: >%
: > of the cutting amount, and finally cut the final
: >%
: > by the
: >
: > set of blades Since the cutting amount is very small each time, the stress generated during the cutting process is reduced
: >%
: compared with the traditional one-time cutting method. >Above, segmented
<: : >: >The edges of the circuit board are smooth and smooth, and the board surface is very flat and not twisted or warped. (>It is currently the only machine on the market that can ensure that the aluminum plate does not change shape after cutting.
<: : >: >
: >, due to multiple cutting Therefore, the cutting process is very smooth, which greatly improves the positioning ability of
: >
: >slots, even
: >
<: : >: >circuit boards with very shallow slots , there will be no
: >
: >slot jumping out from the guide knife, to avoid defects.
<: : >: >
: >, due to the blade cutting The force is small, and the high-speed steel material imported from Sweden is used to greatly improve the durability of the blade. When splitting aluminum substrates, the blade life can reach more than one year.
<: : >: >. All cutting blades are calibrated with a dual-frequency laser interferometer to ensure that the rear knife can accurately continue cutting in the groove cut by the front knife.
<: : >: >The tool tip runout is not greater than... Ensure Perfect cutting quality.
<: : >: >, the products are sold by Foshan Lighting, Tovi Environment, Huaqiang Benbang, Xinhua Electrical Appliances, Xingyun Lighting, Yun control Lighting, Zhongshan Opple, Ouri Lighting, Huayi Lighting , Linghang Optoelectronics, Zhongqian Optoelectronics, Shenzhen Zhaochi Energy Saving Lighting Co., Ltd., Shiyan Ruifeng Optoelectronics, Rishang Optoelectronics, Jinlixiang, Zhongming, Bentuo Electronics, Yianyi Lighting, Lehman Optoelectronics, etc. have been widely used with perfect results. Years Brand, quality assurance.
<: : >
: >B aluminum substrate light strip splitting machine:
: >Maximum splitting machine Length
< : brrbr. brb brrrrrb> : >No limit
< : brrbr. brb brrrrrb> : >Operating temperature
< : brrbr. . brb b brrrrrb> : >~
: >℃

< : brrbr .br rrrrrb> : >Plate thickness
< : brrbr br brrrb> : >.~
< : brrbr br brrrb> : > Cut circuit board material
< : brrbr . br b brrrb> : >Aluminum substrate, copper substrate,
: >R
: >～
: >
: >, Fiberglass board

< : brrbr .br rrrrrb> : >Board feeding speed
< : brrbr br brrrb> : > ,
: >Seconds
< : brrbr br brrrb> : >Main machine size
: >Inlet
: >
: >Overall size after the discharge tray is installed
< : brrbr . br b brrrb> : > (
: >Length
: >)*(
: >Width
: >)*(
: >Height
: >)
: >(
: >Length
: >)*(
: >Width
: >)*(
: >Height
: >)


< : brrbr .br rrrrrb> : >Blade material
< : brrbr br brrrb> : >< >Japan
< : brrbr br brrrb> : > Weight
< : brrbr . br b brrrb> : >

< : brrbr . .br b rrrrb> : >Power supply
< : brrbr . br b brrrb> : >< br/>: >,
: >
<: brrbr . br b brrrb> : >Storage temperature
< : brrbr . . br bb brrrb> : >~
: > ℃
: >