IC card access control and attendance all-in-one machine

1. Product configuration
A set of B series contactless card access control and attendance all-in-one machine consists of power supply, controller, communicator, card issuing reader, access control reading head, lock, door opening button, door closer, It consists of several parts: card and software. This system can realize two control modes of single door two-way or single door one-way. It adopts high-performance central processor, large-capacity memory, and large-screen LCD display. It has the advantages of easy use, high reliability, and large data storage capacity.
2. Technical parameters
. Power supply: power
. Working environment: Temperature: ℃ ~ ℃ Humidity: ~
. Card reading type: series card
. Read Card frequency: series is 3
. Reading and writing distance:
. Reading and writing time:
. Storage capacity: user cards and user passwords, 3 card swiping records.
. Data saving: Save data and it will not be lost after power failure.
. Communication method: Communication communication distance: about meters, you can also add repeaters to extend the communication distance
. Volume:.
3. Product features
. LCD Chinese display screen, intuitive and clear display.
. Large storage capacity, convenient for users to store various data.
. Built-in backup battery, it can continue to be used for one hour when the power is cut off in attendance mode.
. The door opening method is flexible and has three door opening methods: card opening, card + password opening, and password opening.
. The status of the door can be remotely monitored on the machine, and it has the function of forcing the door to open remotely.
. It has the function of opening the door by time period, grouping and time period.
. It adopts contactless card. Compared with magnetic card and contact card, it is contact-free, easy to use and has higher confidentiality. and reliability advantages. It can be seamlessly connected with equipment such as food sales and water saving. One card can be used for multiple purposes.
4. Installation
． Connect the connector on the left to the power supply,
. The crystal head base is connected to the communication line connector and the communicator
. Connect the black and red wires to the power cord of the electric lock
. The blue and white wires are connected to the electric lock signal wire
. Green and yellow wires are connected to the switch button
. During customer installation, it is recommended that the bottom of the access control and attendance all-in-one machine casing (half the height of the casing) be installed inside the wall to prevent the machine from being damaged due to exposed threads.
5. Instructions for use
. Keyboard functions
[ - ] Numeric keys,
[ ⊙ ] Press this key to enter the password door opening state
[ ] Function confirmation key< br/> [ ] Function cancel key
[] Menu key
[ ▲ ] Cursor forward key
[] Cursor backward key
. Power-on display
. Password Open the door:
Press the ⊙ key on the standby interface, and the please enter the door opening password interface will appear. Enter the four-digit power-on password, press the button to confirm, and the electric lock will open after the correct input.
If there is no operation in the password interface, it will automatically exit after seconds,
. Menu
Press the key in the standby interface to enter the menu settings as follows. After pressing, you will be prompted to enter the password, here The password is taken from the value of the operating password of the device parameter management access control and attendance all-in-one machine in the software
Set the door opening password:
The first item after entering the function menu is to set the door opening password setting. Press to enter the door opening password setting interface. The door opening password It is a four-digit number. After inputting, press the button to save.
Record query:
After entering the function menu, the second item is the record query function. Press to perform record query, and press the ▲ arrow to turn pages. The latest 30,000 records can be queried.
Set address number:
After entering the function menu, the third item is to set the address number (that is, the machine number of the machine itself). Press 3 to enter the address number setting interface and enter Three-digit machine number, press button to save. The machine number value is between -.
Modify time:
The fourth item after entering the function menu is to modify the time. Press to modify the time of the machine itself. The up and down arrows function here as cursor movement keys. After setting is completed, press the key to save.
Modify the baud rate:
After entering the function menu, the fifth, sixth, and seventh items are the baud rate setting functions. Press the arrow on the function menu interface to see the values represented by the fifth, sixth, and seventh items. After setting the baud rate value, the machine will automatically restart. When communicating, the baud rate set in the machine must be consistent with the baud rate in the software configuration tool for communication.