Year1
- 型号：
- SL8.0
- 功率：
- 18.5kw
- 产量：
- 8吨
. - . -1. Purpose of straw kneading machine
- . -
- . -The straw kneading machine can knead corn straw, sorghum straw, bean straw and other crop straw into softer materials< br/> - . -Pole
- . -shaped feed, suitable for small feed mills and straw briquetting machines to solidify biomass into rows and cattle, sheep, and horse farmers.
- . -
- . -2. Structure and technical parameters of the straw kneading machine
- . -
- . -The straw kneading machine mainly consists of a feeding port, a hammer, It consists of tooth plate, fan, discharge port, motor and frame.
- . -
- . -Technical Parameters
-
. - . -Type
- . -
- . -No.:
- .
- . -Type
- . -
- . -No.:
- .
- . -
- . -Supporting power:< br/> - .
- . -~
- . -
- . -kilowatt
- . -
- . -
- . -Supporting Power:
- .
- . -~
- . -
- . -kW
- . -
- . -Spindle speed:
/> - . -
- . -turn
- . -
- . -minute
- . -
- . -
- . -spindle Speed:
- . -
- . -rev
- . -
- . -min
- . -
- . -Rotor working diameter:
- . -
- . -
- . -Rotor working diameter:
- . -
- . -
- . -Production efficiency:< br/> - .
- . -~
- . -
- . -
- . -Production efficiency:
- . -
- . -~
- . -
- . -
- . -Forage length:
- . -
- . -~
- . -< br/> - . -
- . -Forage length:
- . -
- . -~
- . -
- . -
- . -Throwing distance:
- . -
- . -～
- . -
- . -
- . -Throwing distance:
- . -
- . -~
- . -
- . -
- . -Outline dimensions:
- . -**
- . -
- . -Outline Dimensions
- . -：
- . -**
- . -
- . -
- . -（ The above parameters are for reference only and may be changed without prior notice)
- . -
- . -3. Use of straw kneading machine
- . -
- . -< br/> - . -, Installation of straw kneading machine
- . -
- . - (
- . -
- . -) Use bolts to secure the kneading machine and motor Install it on the machine base, adjust the position of the motor, ensure that the motor pulley groove and the main machine pulley groove are aligned and obtain the appropriate belt tightness, and place the machine base and the machine on a flat cement floor.
- . -
- . - (
- . -
- . -) All electrical equipment and wiring must be connected safely and reliably.
- . -
- . - (
- .
- . -) After installation, each part of the machine operates flexibly, and it can be put into operation only after it has been run dry without any jamming or collision. use.
- . -
- . -
- . -, operating points of the straw kneading machine:
- . -
- . -
- . - When the machine is operating, the material is manually placed into the feeding port, and enters the working room under the action of the pressure roller at the feeding port, high-speed rotating blades and hammers, and the action of airflow, and is kneaded into bulk feed by the blades, hammers, and tooth plates. Then it is thrown out of the body by the fan.
- . -
- . -Before starting the machine, check the connection of all parts, remove debris and stones in the machine and in the material to be crushed, then start the machine, and wait until the machine operates normally. Before formal work can begin. During work, operators should feed materials continuously, evenly and without interruption. If there is a blockage due to too many people being fed or the machine makes abnormal noises, stop immediately and troubleshoot. After the work is completed, the power supply should be cut off first, and then the machine should be wiped and the site should be cleaned.
- . -
- . -4. Maintenance of straw kneading machine:
- . -
- . -
- . -Properly maintain the machine , which can extend the service life of the machine. Every
- .
- . - hour the machine works, the two bearings should be lubricated once
- .
- . -hours later. The bearing oil should be cleaned and re-oiled. Inject grease and check hammer piece damage regularly. If one edge and corner is worn, the surface of use should be replaced. If
- . -
- . - all the edges and corners are worn, it should be replaced. When the machine is operating in the open air, it should be equipped with rainproof facilities. If it is not used for a long time after the season, it should be It is recommended that the machine be fully maintained and stored in a ventilated and dry room.
-
- . -
- .Address: South Gate 5, Trade City, Qufu City, Shandong Province
-
- .No.:
-
-
- .Mobile phone:
-
-
WhatsApp
