Taian DMC32 pulse bag dust collector

3Pulse bag dust collector
The pulse bag dust collector body consists of four parts: shell, filter bag assembly, injection dust cleaning device, and ash discharge device.
The shell part consists of an upper box, a middle box, a ash hopper, and an air inlet and outlet.
The filter bag assembly consists of filter bags, dust collector bag cages, etc.
The injection soot cleaning device consists of an air bag, an injection pipe, a pulse valve, an electromagnetic control valve, an electric controller, etc.
The ash discharge device consists of motor, reducer, screw conveyor and star unloader.
The electromagnetic pulse valve type uses a right-angle electromagnetic pulse valve, and the II type uses a submerged electromagnetic pulse valve, which reduces the resistance of the pulse valve itself and is an ideal pulse injection method.
The air inlet of the pulse bag dust collector is located on the ash hopper. When the dust-containing gas enters the ash hopper from the air inlet, it first hits the baffle of the air inlet. Due to the inertia, the coarse particles of the gas are removed. Directly enters the ash hopper to pre-collect dust. The airflow entering the ash hopper then turns upward and passes through the filter bag with a metal skeleton inside. The dust is collected on the outer surface of the filter bag, and the purified gas enters the upper part of the filter bag chamber. The clean room is collected into the air outlet duct for discharge. The indoor dust collection bags are divided into several rows, and each row of dust collection bags is cleaned at a given time interval. When the pulse valve is opened, high-pressure air is sprayed into the filter bag to remove dust on the surface of the filter bag. The pulse injection width and cleaning cycle of each row of filter bags are automatically and continuously controlled by a dedicated cleaning program controller. The dust-containing gas enters the filter chamber from the ash hopper (or the lower open flange), and the larger particles fall directly into the dust. Bucket or silo.
Pulse bag dust collector
Selection instructions:
This single machine has six specifications, each specification is divided into two installation forms to meet the needs of different occasions. Requirements, or can be customized according to the needs of users. The following will introduce to users the selection parameters and selection principles of pulse bag dust collectors:
. The main technical parameters for bag dust collector selection are air volume, gas Temperature, dust concentration and humidity. According to the maximum values of air volume, gas temperature and dust concentration in the process design, which are slightly smaller than the values in the technical performance table, the corresponding dust collector model is the required dust collector model.
The air consumption in the table is for the centralized air supply in the factory. For example, when the air compressor is used alone, the air consumption in the table must be magnified.
3. In the compressed air consumption column, the air consumption proposed is the maximum air consumption of the equipment of this type.
.Equipment appearance and foundation (see drawings), our company can also design a dust collector with an appearance that meets the user's requirements according to the user's site conditions.