Year1
- 规格：
- 2.1*6
- 透光率：
- 90%
Translucent solar panels have the highest light transmittance and can be matched with glass. The coated board will not produce yellowing, atomization, or poor light transmission when exposed to sunlight. After ten years, the light transmission loss is only 0.0%, and the loss rate is as high as -0.0% for glass fiber.
Impact resistance: The impact strength is twice that of ordinary glass, three times that of an acrylic plate of the same thickness, and three times that of tempered glass. There is no crack when dropped from two meters below with a hammer. There are glass and steel that do not break. Good name.
Anti-UV: One side of the board is co-extruded with an anti-UV coating, and the other side has anti-condensation treatment, integrating the functions of anti-UV, heat insulation and anti-fog droplets. It can block the passage of ultraviolet rays and is suitable for protecting valuable artworks and exhibits from ultraviolet damage.
Light weight: The specific gravity is only half that of glass, saving the cost of transportation, handling, installation and supporting frames.
Flame retardant: National Standard B confirms that solar panels are flame retardant to the first level, that is, Class B. The ignition point of the board itself is ℃, and it will self-extinguish after being removed from the fire. It will not produce toxic gases when burning and will not contribute to the spread of the fire.
Flexibility: It can be cold-bent at the construction site according to the design drawings, and installed into arches, semi-circular roofs and windows. The minimum bending radius is times the thickness of the plate, and hot bending is also possible.
Sound-insulating solar panels have obvious sound insulation effect and have better sound insulation than glass and acrylic panels of the same thickness. Under the same thickness, the sound insulation of solar panels is B higher than that of glass. Internationally, it is the preferred material for highway noise barriers.
Energy saving: Keep cool in summer and keep warm in winter. The thermal conductivity (value) of solar panels is lower than that of ordinary glass and other plastics. The thermal insulation effect is higher than that of the same glass. The thermal insulation of solar panels is the highest. This greatly reduces heat loss and is an environmentally friendly material used in buildings with heating equipment.
Temperature adaptability: The board does not become cold brittle at -℃, does not soften at ℃, and has no obvious changes in its mechanics and mechanical properties in harsh environments.
Weather-resistant solar panels can maintain the stability of various physical indicators in the range of -℃ to ℃. After hours of artificial climate aging test, the degree of yellowing is , and the light transmittance decreases by only .
Anti-condensation When the outdoor temperature is ℃, the indoor temperature is 3℃, and the indoor relative humidity is lower than that, there will be no condensation on the inner surface of the material. Dew will flow along the surface of the board and will not drip.
Simple and convenient, not as bulky as traditional materials, it has been widely used in coastal cities in my country in recent years.
Product application scope
, lighting ceilings in office buildings, department stores, hotels, villas, schools, hospitals, stadiums, entertainment centers and public facilities
, sound insulation on highways and urban viaducts Barriers
Canopies for agricultural greenhouses, flower greenhouses and indoor swimming pools
, awnings for subway entrances and exits, stations, parking lots, shopping malls, pavilions, lounges, corridors, etc.
, bank anti-theft counters, Jewelry store anti-theft windows, police explosion-proof shields
, advertising light boxes, bus stop panels, advertising display boards
, indoor partitions for offices and homes, pedestrian passages, guardrails, balconies, shower rooms, etc.
WhatsApp
