Industrial FRP Cooling Tower Round FRP Cooling Tower Square FRP Cooling

Product structural features and all tower steel frame structures have been statically checked by the Mechanics Department of Shanghai Jiao Tong University and can withstand Richter-level earthquakes and Richter-level typhoon attacks. The entire tower structure is very stable, and the steel frame components are double treated with galvanizing and anti-corrosion paint, which has good corrosion resistance. The internal components of the tower can also be equipped with non-metallic parts and stainless steel parts according to different water qualities or user requirements.
The motors and fans are produced by the most influential specialized manufacturers in China. The motor is a special outdoor motor for cooling towers. Its protection level and insulation level are all in line with the International Electrotechnical Commission standards. It can be equipped with a two-speed or three-speed motor according to user requirements to save energy under different climate conditions. The fan is a fiberglass airfoil fan, which has the advantages of good aerodynamic performance, large air volume, high efficiency, low noise, reliable use, and smooth operation.
The heat dissipation filler is made of highly efficient modified materials. The sheet type has been tested by Xi'an Thermal Engineering Institute and Beijing Academy of Water Sciences. It has the advantages of small air flow resistance, large specific surface area, good hydrophilicity, large heat dissipation coefficient, etc., and is not easy to block, easy to clean, high strength, good flame retardant performance, and durable. aging and other process characteristics.
The tower body and air duct are made of R, and the surface is coated with gel coat resin, which has the advantages of bright and clean, corrosion resistance, and UV resistance. The gel coat is produced by foreign-funded enterprises, and the color can be selected by the user. The hair dryer adopts the latest speed rotation type hair dryer, which has the advantages of high kinetic energy recovery rate, high strength, and large wind and snow load resistance.
Using the most advanced wave-type water collector in China, the water collection efficiency is as high as above. The sheet material is R.
The B nozzle, which is one-time injection molded using international advanced technology, has the advantages of low water supply pressure, uniform water distribution, no clogging, and no hollow phenomenon.
The square counterflow cooling tower has three series, nine models, and 90 products
Structural features
Filling: It adopts the oblique trapezoidal wave filler sheet patented by the Fourth Institute, and adds convex ribs in the transverse direction. It has large water redistribution ability, low resistance, good thermal performance, high temperature resistance, low temperature resistance - -℃, and good flame retardancy.
Motor: Designed by the Department of Electrical Engineering of Tsinghua University and manufactured by the Yingmengjin Motor Factory, the patented product of the Fourth Institute is a variable torque variable extremely low-noise energy-saving motor. It has good sealing and waterproof performance, high temperature resistance, high efficiency and low noise.
Deceleration device: The deceleration device with power of /. adopts polyester fiber reinforced neoprene power belt transmission, which is high temperature resistant, high efficiency, does not stretch when exposed to water, overcomes the slipping phenomenon, and makes very little noise. The power reduction device adopts gear reduction method, and the motor is installed outside the hair dryer.
Fan: Low-noise, high-efficiency, airfoil-shaped fiberglass blades designed by the Department of Engineering Mechanics of Tsinghua University based on the parameters of this series of products. They have low noise, high efficiency, and adjustable blade angles.
Water collection and water distribution device: Use reflective low-pressure nozzles. For small towers, single swirl nozzles are used to achieve uniform water distribution and low water pressure. The water collecting device can reduce the loss of floating water to...
Sound-absorbing facilities: The ultra-low-noise cooling tower is equipped with a shield and sound-absorbing grille with sound-absorbing materials on the air outlet of the upper tower body to achieve the maximum noise reduction effect.
Sound-absorbing facilities: The ultra-low-noise cooling tower is equipped with a shield and sound-absorbing grille with sound-absorbing materials on the air outlet of the upper tower body to reduce the noise of the fan and motor. For small towers, mushroom-shaped sound-absorbing grilles are installed.
Dripping noise reduction pad: For low-noise and ultra-low-noise cooling towers, specially designed sound-absorbing pads with good water permeability are equipped with a layer of ramp plates underneath, which greatly reduces dripping noise.
Inspection platform: The checkered steel plate inspection platform on the top of the tower is convenient for maintenance and installation.
Lower tray: Cooling towers with shallow water trays and deep water trays are equipped with lower trays for water storage. According to ordering requirements, it can be equipped with overflow, sewage, automatic and manual water supply pipes, and can directly absorb water from the lower tray.
Bracket: Cooling tower steel bracket, galvanized and coated with epoxy asphalt paint to prevent corrosion, and fasteners are galvanized bolts.