Pipe network structure design of drip irrigation project

We have introduced the relevant content of the drip irrigation project to you before. The drip irrigation project is an engineering facility that uses drip irrigation technology to realize irrigation. The pipe network structure design is particularly important. The following is an introduction to the pipe network structure design of the drip irrigation project:
Max The depth of the frozen soil layer is less than . Taking into account the impact of mechanical farming on the pipeline, the design depth of the trunk and branch pipes is . In order to control the operation of each branch pipe, a control gate valve is installed at the head of the branch pipe and a drain valve is installed at the tail. Each gate valve and drain valve Separately build valve wells and drainage wells for protection. In order to prevent the drip irrigation project from causing water hammer in the pipeline due to valve activation and pipe explosion, it is calculated that the opening and closing time of the branch pipe valve shall not be less than 1. Therefore, during the operation and management of drip irrigation projects, the opening and closing time of the valve should be controlled to be above to prevent the occurrence of water hammer.
The first hub of the drip irrigation project includes power machines, water pumps, fertilizer (medicine) devices, filtration facilities, and safety protection and measurement control equipment. Its function is to take water from the water source, pressurize it, inject fertilizer (pesticides), filter it, and transport it into the pipe network on time and in quantity. It is responsible for the driving, measurement and regulation tasks of the entire system. It is the control and deployment center of the entire system. Through the above understanding, I believe that many customers can master the layout method of pipe network structure, which will be helpful in future work.