Changzhou soft film ceiling, Changzhou lighting film material, Changzhou soft film light box price

Changzhou soft film ceiling, Changzhou lighting film material, Changzhou soft film light box price Manager Zhang’s mobile phone
. ::
Engineering consulting
. :
Soft film ceiling was founded in
Century, due to the various shapes of soft film ceilings and the magical and wonderful color effects, it has gradually become an increasingly popular ceiling material, giving the decorative design a perfect overall effect and unlimited creativity. We know that in many places, appearance design is very important. Soft film ceilings just meet this characteristic. Therefore, various high-end products have appeared one after another. What is the construction process of soft film ceilings? How to install soft film ceilings? The following is provided by Guangdong De Mei Decoration Company will introduce it to you in detail.

. - 1. Precautions for soft film ceiling construction

. -
- Before installation, you should go to the construction site to see if there are conditions for installation. The keel is mainly reflected in whether the wall is completed, whether the carpentry is qualified, whether the plastering area is completed, and some dimensions of the carpentry must be done according to the requirements.

. -
- Before installing the soft film ceiling, be sure to check whether the keel joint is firm and smooth. The sealing area must be properly treated as above, and the sprinkler head must be taped with tape. . When installing a soft film ceiling, first fix it from the middle and both sides, and pay attention to the installation size. The welding seam must be straight and the angle position must be well controlled. After the last four weeks are completed, trim off the excess ceiling to ensure a beautiful appearance.

. -
-, Open-hole lamp: Mark the lamp hole, and
stick the lamp ring accurately to the bottom of the soft film. After it is firm, remove the excess lace.

. -
- When the conditions of the construction site permit, the carpentry work required in the design drawings must be done to fix the parts
- Special keels, the corners must be Right angles are flat and smooth.

. -
- Air opening and light pipe opening: Find the position of the air opening and light pipe opening, and install the soft film on the
- special keel in the same way as the surrounding areas. , pay attention to the corners to be flat. After it is done, just cut off the excess smallpox.

. -
- Finally, clean the surface of the soft membrane ceiling with a clean towel.

. -
- Note that the light stand, air outlet, and light tube panel must be level with the surrounding keel, and must be firm and stable without swinging.

. -
- For smoke detectors and ceiling lamps, position them first and then make a wooden chassis. The bottom surface of the wooden chassis should be polished smooth, and pay attention to the horizontal height. If it is too low, the chassis will easily stand out. traces