Year1
- 包装：
- 牛皮纸袋包装
- 用量：
- 4-6kg/平方米
- 规格：
- 50kg/袋
★Product features
◆ It has good adaptability to old concrete base, strong adhesion, denseness, and good waterproof and anti-seepage properties.
◆It has protective properties for steel bars, can repair and protect corroded steel bars, and has good durability.
◆Can be constructed on wet base or humid environment, and can perform local emergency repairs without stopping production.
◆It is easy to operate, saves time and labor, and can replace organic coatings in medium-strength gas corrosive environments. It is simpler to construct and cheaper than resin materials.
★Scope of application
◆Used for exterior plaster repair of reinforced concrete or cracked building surfaces, panels, load-bearing columns, beams, etc. in industrial and civil facilities, exterior plaster decoration of moisture-sensitive industrial and civil buildings .
◆It is used to repair defects such as honeycombs and holes in concrete, thin-layer repair of damaged concrete floors, and overall repair and protective surfaces on the surface of concrete, masonry structures or steel structures.
◆Used for the repair of industrial and civil buildings that have been damaged and cannot meet design requirements. Especially suitable for the repair of floor slabs, panels and open-air thin plate structures.
◆It is used for maintenance projects of underground pipelines, power plant water towers, chimneys, chemical plant structures and various factory buildings with corrosive gases that require corrosion resistance.
◆This product is a polymer mortar used in the steel wire rope polymer mortar reinforcement method.
◆This product is a polymer mortar used for repairing, leveling and strengthening roads and bridges.
★Instructions for use
◆ Base layer treatment:
The surface of the base layer must be clean, dust-free, oil-free, and free of chemical corrosive medium residues. The surface of the porous material should be soaked with water in advance, and the surface of the steel base layer should be cleaned of floating rust.
If there is leakage, it must be treated with a quick leak-stopping agent first. It is best to keep the base surface moist until there is no clear water to achieve better construction results.
◆Material Preparation:
First pour the glue into the bucket, then slowly add the powder while stirring according to the ratio of glue:powder:, and stir until it is uniform and has no lumps. .
, mechanical stirring or manual mixing can be used, and the prepared glue should be used up within hours.
◆Construction and maintenance:
When using polymer repair mortar as the overall surface layer, the thickness should not be less than 3. When the construction area is large at one time, construction joints should be left or construction should be staggered in pieces. The area of each piece should not exceed -, depending on the site environment. The gap time between repairing joints or staggering construction in sections should not be less than an hour.
When making the overall surface layer on the facade of concrete or masonry structure and the surface of steel structure, it should be done in two times, and the interval between each time should not be less than an hour. When performing the last wipe, it should be smoothed in one go and should not be applied repeatedly.
★Notes
◆The ambient temperature for the construction of this product is ℃ and should not be lower than ℃. The raw materials must not be contaminated by moisture, rain, sunlight and debris.
◆This product is not suitable for construction in rainy days or freezing weather. If construction must be carried out in winter, necessary anti-freezing measures should be taken.
◆This product should be mixed and used immediately. Do not mix too much at one time, and each mixing should be used up within an hour.
★Safety Matters
◆Gloves and goggles must be worn during construction. If it splashes on skin or eyes, rinse with clean water. If inflammation occurs, seek medical attention promptly.
◆Care must be taken when handling dry powder to reduce the formation of dust. If there is excessive dust, a visible face mask must be worn.
★Packaging, Storage and Transportation
◆ This product should be stored in a dry and ventilated place above ℃, avoiding exposure to the sun, rainforest, moisture, and freezing. The shelf life of the unopened powder is one month.
◆ Powder packaging specifications are kg/bag.
★Solemn Statement
The use of this product is beyond the control of the manufacturer, and the company does not assume any liability arising from improper use. Please refer to the product manual when using it. For related questions, please consult your local dealer or the company's technical service department.
WhatsApp
