Year1
- 流量：
- 10-2000m3/h
- 扬程：
- 1-50m
- 功率：
- 3-132KW
. The whole machine is a dry lower pump type. The motor adopts the oil chamber sealing method and is equipped with a mechanical seal, which can effectively Prevent high-pressure water and impurities from entering the motor cavity.
. In addition to the main impeller, there is also a stirring impeller, which can stir the sludge settled at the bottom of the water into a turbulent flow and then extract it.
3. The impeller and stirring impeller and other flow-passing parts are made of fully cast stainless steel, which is wear-resistant, corrosion-resistant, has strong sewage discharge ability, and can pass larger solid particles.
. The motor is submerged underwater and is not limited by the suction range. It has a high slag suction rate and more thorough desilting.
. The overall equipment is simplified and no auxiliary stirring device or spraying device is allowed. The operation is simple and the total investment of the unit is reduced.
. The stirring impeller is directly close to the deposition surface, and the concentration is controlled by the depth of descent. When the medium has a heavy specific gravity, the medium concentration can be increased by installing auxiliary devices
Conditions of use
. The power supply is (needs to be customized)/3 three-phase AC power supply, and the capacity of the distribution transformer is times the rated capacity of the motor.
． Value -, the medium temperature shall not exceed ℃, the R-type medium temperature shall not exceed ℃ (the maximum temperature shall not exceed ℃), and it does not contain flammable and explosive gases.
3. Maximum weight concentration of solid particles in the medium: .
． Diving depth of the unit: no more than 1 meter. The minimum diving depth is subject to submerging the motor.
． The working position of the unit in the medium is vertical, with the upper part suspended.
In stock, can be customized, please call us for details!
Selection hotline:- :
WhatsApp
