PSQ type submersible sand pump, wear-resistant sand pump, sand pump manufacturer

流量：

10-2000m3/h

扬程：

1-50m

功率：

3-132KW

Type submersible sand pump, wear-resistant sand pump, sand pump manufacturer-Laiwu Luda Pump Equipment Co., Ltd. This series of products is designed and manufactured by absorbing advanced domestic and foreign technologies. The unique sealing device can effectively balance the pressure inside and outside the oil chamber, maximizing the reliability of the mechanical seal. The motor adopts multiple protection measures such as overheating protection and water inlet detection protection, which can be used in Long-term safe operation under harsh working conditions. The pre-mixing impeller of the water pump can impact the deposited silt into a high-concentration turbulent flow, allowing the water pump to achieve high-concentration silt suction without the need for additional devices.
Structural features:
. The whole machine is a dry lower pump type. The motor adopts oil chamber sealing method and is equipped with a mechanical seal, which can effectively prevent high-pressure water and impurities from entering the inner cavity of the motor.
. In addition to the main impeller, there is also a stirring impeller, which can stir the sludge settled at the bottom of the water into a turbulent flow and then extract it.
3. The flow-passing components such as the impeller and stirring impeller are made of high-hardness high-chromium cast steel, which is wear-resistant, corrosion-resistant, has strong sewage discharge capabilities, and can pass larger solid particles.
. The motor is submerged underwater and is not limited by the suction range. It has a high slag suction rate and more thorough desilting.
. The overall equipment is simplified and the total unit investment is reduced.
Conditions of use:
． The power supply is,/, three-phase AC power, and the capacity of the distribution transformer is times the rated capacity of the motor.
． The medium temperature shall not exceed ℃. Type R (high temperature resistance) shall not exceed ℃ (the maximum temperature shall not exceed ℃). It does not contain flammable and explosive gases.
3. The maximum weight concentration of solid particles in the medium: ash and slag are.
． Diving depth of the unit: no greater than 1 meter, no less than 1 meter.
． The working position of the unit in the medium is vertical, and the working state is continuous.
In stock, can be customized, please call us for details!
Selection hotline:- :