mud pump, mortar pump, slurry pump, slurry pump

流量：

10-2000m3/h

扬程：

1-50m

功率：

3-132KW

- Mud pump, mortar pump, slurry pump, pumping pump Laiwu Luda Pump Equipment Co., Ltd.
Widely used in sand pumping, iron sand pumping, gold sand mining, land reclamation, power fly ash transportation, metallurgical industry tailings transportation, etc. The maximum mixed flow rate can reach
cubic
hours, and the maximum diving The depth can reach
meters, and it is suitable for various sand pumping environments that require large flow and deep water sand pumping.
- Structural features
:
.
- The whole machine is a dry lower pump type. The motor adopts oil chamber sealing method and is equipped with a mechanical seal, which can effectively prevent high-pressure water and impurities. Enter the motor cavity.
.
- In addition to the main impeller, there is also a stirring impeller, which can stir the sludge settled at the bottom of the water into a turbulent flow and extract it out.
3.
- The impeller and stirring impeller and other flow-passing parts are made of high-hardness high-chromium cast steel, which is wear-resistant, corrosion-resistant, has strong sewage discharge capabilities, and can pass larger solid particles.
.
- The motor is submerged underwater and is not limited by the suction range. It has a high slag suction rate and more thorough desilting.
.
- The overall equipment is simplified, no auxiliary stirring device or injection device is required, the operation is simple, and the total investment of the unit is reduced.
.
- The stirring impeller is in direct contact with the deposition surface, and the concentration is controlled by the depth of penetration. When the specific density of the medium is large, the concentration of the medium can be increased by installing auxiliary devices.
- Conditions of use
:
-. The power supply is
- or
, three-phase AC power supply, and the capacity of the distribution transformer is
- times the rated capacity of the motor.
-． The medium temperature shall not exceed
br℃
- ℃
-,
- type shall not exceed
br℃
- ℃
(
- The maximum temperature does not exceed
br℃
- ℃
)
-, and does not contain flammable and explosive gases.
-． The maximum weight concentration of solid particles in the medium: ash and slag are
- , and slag is
- .
-． The diving depth of the unit: no greater than
br meters
- meters
-, the minimum diving depth is subject to submerging the motor.
-． The working position of the unit in the medium is vertical, with the upper part suspended.
- Selection hotline:
-: