Supply Zhongpeng penetrating transparent sealing primer

. Penetrating transparent sealing primer
, is refined according to strict environmental standards and uses net-odor emulsion. The product has a fresh and natural smell, low content of harmful substances, strong full-effect alkali resistance and sealing, and can effectively improve the The adhesion of the topcoat can improve the effect of the topcoat. Especially for the internal and external walls, applying Zhongpeng penetrating transparent sealing primer before laying ceramic tiles can improve the adhesion of the internal and external walls, seal, waterproof, moisture-proof, and prevent external wall water seepage. Anti-aging and other obvious effects.
Product advantages:
, , Use purifying emulsion
, Fully alkali resistant, strong sealing property
, Improve topcoat adhesion
, Improve topcoat effect
Applicable base:
New wall plaster base, gypsum board base, old coating, etc. for interior and exterior walls.
Main ingredients:
Secondly purified lotion (type: acrylic polymer), selected high-quality pigments, fillers, and water.
Construction method:
Roller coating, brush coating or airless spraying.
Construction supporting equipment:
Level the wall, apply one coat of corresponding interior wall sealing water paint, and then apply two coats of interior wall water paint.
Construction precautions:
, . . The wall surface to be painted must be solid, clean, dry, and the surface is smooth
. . In any of the following situations: the moisture content of the wall is greater than the value When the ambient temperature is below ℃ or below, the air humidity is above, heavy fog, strong wind, or rain, it is not suitable for construction
. When constructing dark or brightly colored products, increase the number of coating passes appropriately to achieve satisfactory results
br/> , Before applying colored water paint, please make sure it is correct before proceeding with large-area construction, and pay attention to avoid color difference. Use clean water to clean the tools after construction. The surface and environmental conditions of the wall to be painted must comply with the " Relevant provisions of "Construction and Acceptance Regulations for Building Painting Projects".
, Theoretical dosage:
Please refer to the instructions for specific product details. The actual painting area depends on the surface condition and construction method.
, Surface dry time:
Refers to touch dry for 3-minutes (°C, relative humidity, wet film thickness in microns) and recoating time is more than 1 hour (drying time will vary with changes in temperature and humidity).
, Maintenance time:
days/℃, low temperature (should not be lower than ℃) appropriately extended to obtain the ideal paint film effect.
, Safety instructions:
Water paint cans must be tightly closed and placed out of the reach of children. Avoid direct contact with sensitive parts of the skin. Take appropriate protective measures. If it accidentally splashes into your eyes, please use it immediately. Rinse with plenty of water and go to the hospital. When water paint is spilled or leaked, cover it with sand or soil and sweep it away. Do not pour water paint into sewers or drainage pipes. Construction should be carried out strictly in accordance with the "Regulations". Please refer to the relevant product instructions for specific use. .
, Storage

Storage:
Store in a cool, dry and ventilated place. The storage temperature is between -℃ and be strictly protected from frost.
, Warranty

Quality

Period:
months
,