Js75 reducer

规格：

12.35.60

This reducer is mainly used as a kilowatt reducer for mining scraper conveyors. Reducer: Three-stage spiral gear reducer. The reducer is installed on the side of the conveyor head frame and arranged parallel to the conveyor. The four shafts of the reducer are the output shafts, and the splines of the four shafts drive the conveyor sprocket. The first shaft of the reducer is connected to the motor through a coupling to complete deceleration and power transmission.
It consists of a first arc bevel gear shaft, a second helical gear shaft, a third cylindrical gear shaft and a fourth output shaft. The four shafts are fixed in the upper and lower boxes of the reducer by rolling bearings. The material of the upper and lower boxes of this reducer is gray cast iron.
Gear module and speed ratio of reducer
Speed ratio level Pinion gear module Pinion gear teeth number Large gear module Large gear teeth number Speed ratio
First level..3:
Second stage
Third stage
Overall speed ratio:
The overall dimensions (length, width and height) of the type reducer are 3 and the weight is 3.
The reducer can be used in reverse and adopts natural cooling.
Technical requirements
. Gear accuracy level
Both bevel gears and cylindrical gears are manufactured with B-level precision.
.Materials used for gears and shafts
The reducer shaft gears and gears are all made of high-strength alloy materials for quenching and tempering, and the tooth surfaces are carburized and quenched to extend the service life of the gears
. The four shafts of the reducer are quenched and tempered with B high-strength alloy steel.
Advantage features:
Main parameters such as center distance and nominal transmission ratio have been optimized and designed, and the main parts are interchangeable.
The gears are made of high-quality alloy steel through carburization and quenching, and the tooth surface hardness is up to 100%.
Small size, light weight, high precision, large load-bearing capacity, high efficiency, long life, high reliability, smooth transmission and low noise.
Bearing total axial clearance requirements:
First axis clearance. mm, second axis clearance. mm, third axis clearance. mm, fourth axis clearance. mm.
The clearance of each shaft bearing is adjusted by an adjusting pad.
The assembled reducers should be subjected to no-load test, temperature rise test and noise test one by one. They should meet the requirements of the general technical conditions and standards for reducers for scraper conveyors and scrapers.
Factory address: Liying Industrial Park, Rencheng District, Jining City, Shandong Province
Sales hotline:
Business: