Yanzhou specializes in the production of gray epoxy zinc-rich primer manufacturers

As the seasons pass by, who will be left by your side in the end? It seems that more and more losses are beginning to replace gains. How to choose between those deep and shallow traces in the years, those memories that cannot be fixed. Find a glass of ice-cold water to quench your thirsty throat. Bailian Paint is an oasis in your dry desert! Help you erase all traces of corrosion
Contact: Manager Wang
Position: Sales Manager
Mobile:
:
WeChat ID:
: 3
1. Product Composition This paint is a two-component heavy-duty anti-corrosion primer composed of zinc powder, epoxy resin, etc. as one component and curing agent as the other component (B).
2. Performance The paint film contains more than zinc powder, which protects the surface of steel and has good adhesion and excellent water resistance and anti-rust properties. The paint film is quick-drying and oil-resistant, and can be matched with most anti-rust paints and topcoats. The paint film thickness is controlled at about microns without affecting the welding and cutting performance, and it dries quickly at room temperature.
3. Main technical indicators
Paint film performance indicators
Actual measured values of project indicators
Color gray meets standard color difference
Flash point is about ℃ ℃
3. Construction Description:
Surface treatment: In order to protect the metal, the steel surface needs to be treated by shot blasting or sand blasting to remove scale, rust, dust, etc., and it can only be painted after reaching the Swedish rust removal standard. .
. Paint preparation: Before use, the components should be fully stirred evenly. Prepare according to the weight ratio: over.
Coating interval: As a workshop primer, the shortest coating interval is half an hour and the longest does not exceed 3 days. As an anti-rust primer, the shortest coating interval is hours and the longest does not exceed days. If the time is too long, Zinc salts on the surface should be removed.
. Coating process: The coating is sprayed by air, high-pressure airless spray, or brush. If the viscosity is too thick, use special diluent, and the dosage should not exceed.
If the temperature is lower than ℃, the curing reaction will be slow. At this time, low-temperature curing agent can be used.
, back-end supporting paint
Intermediate paint: epoxy cloud iron gray thick build primer. Epoxy iron red primer, topcoat, epoxy topcoat, chlorinated rubber topcoat, polyurethane anticorrosive topcoat