Solutions for dust and sand generation from Fuling floor factory floor

Instructions for use of Fuling floor factory floor dust and sand solution
, base layer requirements
①Clean the sandy floor to make sure there is no floating dust and keep it dry (slight moisture is allowed, no open water is allowed), and there are no defects The parts should be hardened and wear-resistant first, and then special repair materials should be used to repair the damaged areas on the ground.
② If the ground is seriously sandy, you can use a damp mop to gently mop the ground to clean up the floating soil.
③ Outdoor ground treatment should not be carried out in rainy or snowy weather.
Construction steps:
① Spray or brush this product directly to ensure full infiltration and absorption.
② Sweep excess materials from low-lying areas to the absorbed areas at any time to ensure that the base layer fully absorbs the materials and there should be no accumulation of excess materials.
③ For floors that are severely sandy, they can be repainted three times in a row, with an interval of about an hour.
Maintenance method:
① The treated ground can be used by people after 3 days, and can be used by cars after 3 days.
② The treated ground should not be soaked in open water during the 3-day curing period to avoid human damage.
③ In case of rain or snow after outdoor ground treatment, the ground should be covered and protected to prevent it from being washed and soaked by open water.
, reference dosage
Dosage of hardening and wear-resistant treatment: .~./㎡Dust control and dust-proof treatment: ./㎡
Note: The surface of the concrete is affected by the environment, temperature, concrete density, etc. , the unit usage issued by our company is for reference only, and the specific data is calculated based on the actual usage on site.
5. Precautions
When using the cement surface ash and sand treatment agent, there is no need to add any additives, prepare it, or use it as other auxiliary materials.
.In order to ensure product performance and project quality, it is recommended that professional construction personnel/teams be used for construction.
Contact number