Qianjiang Flooring specializes in controlling dust and sand on concrete floors, sealing and curing construction

Qianjiang Floor specializes in controlling dust and sand on concrete floors, sealing and curing construction
Modern industrial plants rarely use cement mortar floors or concrete floors directly, because ordinary cement mortar floors or concrete floors, even if the quality is fully qualified, Dust will still be generated, especially in workshops, warehouses and other places that are frequently used (mainly for traveling), where dust is more likely to occur.
The solutions to the dust on the factory floor generally include the following:
Solution 1 for dust on the factory floor: Floor paint
Use epoxy resin or polyurethane floor paint for overall coating of the factory floor Installation can completely prevent the ground itself from being rubbed and causing dust.
Advantages of floor paint: no dust at all, easy to clean, anti-oil seepage, bright color, overall beautiful appearance, etc. It is suitable for production workshops with high requirements for cleanliness, such as electronic workshops, precision machinery, pharmaceutical workshops, food and beverage workshops, etc.
Disadvantages of floor paint: The mechanical properties such as hardness, wear resistance and scratch resistance are average, and the surface is easily damaged. It usually needs to be renovated every five years or so. In addition, the floor has high construction requirements and requires professional construction, and the cost is high.
Solution 2 for ash on the factory floor: Aggregate wear-resistant floor
Also known as floor hardener, emery wear-resistant floor, cement-based aggregate wear-resistant floor, it is a factory-premixed dry-mix mortar , which belongs to the category of special concrete floors.
The aggregate wear-resistant floor must be constructed at the same time as the base concrete. When the newly poured concrete enters the initial setting state, the aggregate wear-resistant floor material is evenly spread, and then compacted and polished using a trowel.
Advantages: fast construction speed, good mechanical properties such as hardness, wear resistance and scratch resistance, low cost, it is an economical and durable industrial floor
Disadvantages: aesthetics, impermeability And dustproof performance is slightly worse than floor paint.
Solution 3 for factory floor dusting: Liquid hardener floor
Also known as concrete sealing and curing agent, cement floor sanding treatment agent, liquid floor hardener is a water-soluble chemical hardener that can Penetrate into the treated cement-based ground (such as cement mortar ground, concrete floor, emery ground, terrazzo floor, cement self-leveling ground, etc.), and through a series of chemical reactions, increase the density, surface hardness, and resistance of the surface of the treated ground. Abrasive. If combined with machine polishing, the finished floor will have good gloss and mechanical properties.
Liquid hardener floors combine the advantages of floor paint and aggregate wear-resistant floors (beautiful appearance, dustproof, good mechanical properties, etc.), while avoiding the disadvantages of these two floors (floor paint cannot resist Underground moisture is prone to delamination, scratching, etc. The wear-resistant aggregate floor has poor dustproofness, impermeability and aesthetics).
Among the above three solutions for dust generation on factory floor, floor paint is the best, followed by liquid hardener, and aggregate wear-resistant floor is the worst. However, the specific choice of a factory floor ash emitting solution requires consideration of many factors such as the original ground conditions, usage environment, and user requirements.
Contact number