pert pipe | pert pipe material | pert pipe price

pipe | r pipe material | r pipe price Tianjin R pipe floor radiant heating characteristics: Floor radiant heating is an advanced heating method that saves energy, improves health, and creates a comfortable working and living environment. It has been popular in northern my country, especially in the northeastern region. Large area application. High compressive strength and long service life. The characteristic of the ground radiant heating structure is that it is integrated with the building structure and the heating pipes are buried in fine stone concrete under the ground. Therefore, heating pipes are required to have a long service life and do not need to be replaced or repaired during the service life of the building. After testing, within the kilogram operating pressure range, the service life of the pipe can reach years, which is synchronized with the service life of the building. Good thermal conductivity. The heating in floor radiant heating is to pass hot water through the tube, heat the ground evenly through the coil, and then use the entire ground as a heat dissipation surface to heat the room. The thermal conductivity of R pipe is ./, which is .~ times that of cross-linked polyethylene pipes and other plastic pipes. In comparison, it is more conducive to heat transfer between the pipe and the floor, and the thermal efficiency of the heating system is higher. Easy to bend without rebound, small bending radius, easy to construct and install. When the coiled pipe is laid under the ground, there are many bending parts and a small bending radius, and they are all bent by hand. Other plastic pipes, whether straight pipes are bent or bent pipes are straightened, will generate rebound force, causing certain difficulties in positioning and fixing the coiled pipes when laying. In particular, R pipes are straight pipes and cannot be bent and can only be connected through joints. , there is the possibility of leakage, which will have a certain impact on the construction quality of the project. Due to its easy bending and non-rebound characteristics, the pipe is quick and convenient to lay during construction. The positioning and fixing of the pipe are very easy. Both in terms of work intensity and difficulty, it is far lower than other plastic pipes, and the work efficiency can be Greatly improve. The thermal expansion coefficient is small and the thermal stability is good. Good oxygen isolation performance. Nowadays, most hot water heating systems are closed heating systems, which have high requirements on water quality and stricter restrictions on the oxygen content in hot water. Since other plastic pipes cannot effectively block oxygen penetration, when used for floor radiant heating, the oxygen that penetrates into hot water through the pipes will accelerate the oxidation and corrosion of steel equipment and other easily corroded components in the system, affecting the normal operation and use of the system. Due to its stable cross-linking properties, the life tube can better isolate oxygen penetration and will not have any impact on the water quality in the system, which is beneficial to the operation and maintenance of the entire system. Application scope of R floor heating pipes: public buildings: factories, hospitals, office buildings, libraries, shopping malls, airports, apartments, villas, high-end clubs, stations, museums, etc. Sports facilities: swimming pool, gymnasium, fitness club, etc. Agriculture, forestry and fishery: fry ponds, planting greenhouses, greenhouses, zoological and botanical gardens, etc.