Year1
- 型号：
- JXFM110
- 规格：
- 齐全
1. Product Introduction:
This product is divided into two models: fully automatic and semi-automatic. The difference between fully automatic and semi-automatic is It is fully automatic and equipped with an automatic feeder, and automatically feeds materials at a preset speed. The samples crushed by this machine (samples passing through sieve plates with different apertures) are suitable for the determination of gluten quantity and quality, the preparation of samples with other fineness requirements such as falling number, near-infrared components, grain viscosity, and the determination and analysis of various indicators. .
2. Performance characteristics:
The sample is crushed into powder by r/high-speed mill and hammer, and enters the stainless steel integrator through the stainless steel sieve plate with the high-speed airflow to form the required uniform sample
In the box With advanced sound-absorbing and insulating materials, the noise is lower than similar products at home and abroad
The motor has a built-in temperature control protection circuit. Once the motor exceeds the set temperature, it will automatically stop
. It has high-speed airflow to automatically clean the sample when crushing it. The chamber grinding function eliminates the need to stop work for manual cleaning during sample crushing
Irregularly shaped large particle samples (such as large grain corn), etc., must be pre-crushed by laboratory crushing mill or fed into the crusher.
The high-speed airflow during the hammering and crushing process will cause the loss of water in the sample. Generally, samples containing high moisture will lose most of the water during the crushing process.
3. Technical description:
, Power supply voltage:
, Working frequency:
Motor power:
, Studio diameter:
, Grinding hammer speed :
, Sieve plate aperture:.,.,
WhatsApp
