Zibo 022.40.1600.002 slewing bearing Zibo iko bearing

Zibo...Slewing bearing Zibo bearing/ ' (3,3,3) - Slewing bearing is a new type of mechanical component that has gradually emerged around the world in the past forty years. It consists of inner and outer rings, rolling elements, etc. At present, my country's The finalized production of slewing bearings was mainly organized by the Tianjin Engineering Machinery Research Institute designated by the Ministry of Machinery Industry in the early 1990s to introduce the design and manufacturing technology of the former Federal German Company. It is widely used in ship equipment, engineering machinery, light industrial machinery, metallurgical machinery, medical machinery, industrial machinery and other industries. It is called the joint of the machine. The joints of the human body bear the weight of the human body, and the slewing bearing also bears the comprehensive load of the machine. , so timely inspection and maintenance during the application process is extremely important to ensure the safe operation of mechanical equipment.
/ ' (3,3,3) - After using the new product for several working hours, stop working and check the bolt pretightening torque. If any of the above bolts are loose, check again in the first working hour.
/ ' (3,3,3) -Inspection should be carried out every working hour after stable use. In severe working conditions, the inspection interval should be shortened, depending on the situation.
/ ' (3,3,3) - After accumulated working hours, if a bolt is found to be loose below the specified torque, the bolt and the two adjacent bolts must be replaced with new ones. If the bolts are found to be loose below the specified torque, all bolts must be replaced with new ones.
/ ' (3,3,3) - After the equipment has accumulated working hours, all bolts must be replaced with new ones to ensure its effective operation. For equipment with high rotation speed or continuous rotation or frequent work, every operation Add oil every hour. Under severe working conditions, the time interval for adding lubricating grease should be further shortened.