Year1
- 品质：
- 优
- 厂家：
- 昌黎天建
- 服务类型：
- 现场指导
mm to
mm. The characteristics of this new material are: corrosion resistance, high elasticity, solidity and no deformation. 2. The new shear wall formwork support consists of three systems: shear wall, suspended beam, and open column formwork support combined structure. The three systems use unified accessories, including horizontal beams, vertical beams, external angles, internal angles, top tie rods, door cards, and wall screws. Composed of other accessories. [Vertical beams] are made of cold-rolled steel plates with a thickness of
and then welded. They are composed of jackets, joints, and beam cores. Their structure and performance are the same as the standard vertical beams of the open column formwork support composite structure. Length
Height can be unlimited. [Beams] The cross beams are composed of jackets, beam cores, and articulated joints. The jackets and beam cores are drilled with rectangular holes for adjusting the size of through-wall screws. The vertical beams and formwork are fastened with through-wall screws to ensure that the concrete is poured properly. Time does not increase the mold. There are standard lengths that can be combined into various lengths to meet various wall lengths. 【Yin Angle
Yang Angle is used to connect the turning point of the exterior wall with the beam to ensure the angle of the shear wall during construction. [Door Card] The door card is composed of an inner outer jacket and is provided with a bayonet at both ends connected to the beam
There are through-wall screws on both ends to perforate the two ends
The bayonet is stuck on the beam at the door through wire threading Fasten the rods to ensure that the shear wall transverse panels are at the width of the door and meet the size requirements. [Wall-through screws] Wall-through screws are composed of screw washers and nuts and are used to fasten beams and door cards. Advantages of the new shear wall formwork support:
Strong versatility: the product is completely free to expand, contract and overlap, easy to operate, suitable for safe operation by all personnel, labor saving, suitable for workers of different types exported by international construction units with a large amount of labor exports All are operational. The main components are standardized and have strong applicability: the vertical beam length is made according to the standard module. It can be assembled at will according to the different sizes of the building and can be turned around for multiple projects. The engineering formwork preparation is fast and accurate: the Tianjian Industrial formwork calculation software can be used to quickly Accurate calculation of the amount of materials required for the formwork support system reduces the workload of construction technicians and can save % of formwork materials. Low cost (high reuse rate): it can be reused times, while traditional wood can only be reused times. High safety: This product is completely fastened with standard steel structure parts, has a tight structure, compact connections, and is safer and more reliable.
Improve corporate image: Beautiful, tidy and tidy. A clean and orderly construction site that is easier to manage can greatly enhance the overall image of the project.
d: Simple and convenient construction: The formwork system is mostly composed of sockets and pins. It is easy to install and dismantle, and the construction speed is fast. Compared with the traditional formwork technology, it can improve the work efficiency
d: Smoothness High: The formwork system has high strength and stiffness and good stability, which greatly improves the quality of concrete pouring and can achieve the effect of fair-faced concrete
d: Save time
Thirty square meters of formwork combination structure is taken as an example for on-site operation It only takes - minutes to complete.
d: Save labor
To improve construction efficiency and shorten the construction period, the labor cost of traditional structure is about RMB 100 per square meter, while the digital steel support can be completed with only RMB 100 labor cost.
d: Material saving
Reduced material costs, no need to purchase wooden squares, and steel pipes, screws, iron wires, iron nail formwork main and secondary back flutes (keels) are made of thin-walled steel to replace the traditional The square wood in the formwork process increases the service life of the material and saves wood resources.
Strong anti-corrosion ability: The use of advanced anti-corrosion technology greatly improves the overall corrosion resistance. Long service life and high recycling rate. An important factor in the failure of metal materials is corrosion, especially the steel materials used in building formwork systems, which are prone to failure due to rust due to poor on-site use conditions. Our company has adopted the world's most advanced anti-corrosion treatment technology for automobile steel plates - water-based electrophoresis materials that have been degreased and acidified Washing, rust removal, phosphating, passivation, electrophoresis, and drying form a solid protective layer on the surface of the material, which greatly improves the anti-rust ability. The salt spray test has been verified to last for hours. Therefore, the service life has been greatly improved compared with similar products.
WhatsApp
