Year1
- 产地：
- 深圳
- 型号：
- PA060HL2-40
- 平均使用寿命：
- 20000小时
- -
.
Precautions for selecting a double-axis planetary reducer:
The selection of a precision double-axis reducer should follow the principles of combining applicability and economy. The principle is that the technical indicators of the double-axis planetary reducer can not only meet the requirements of the equipment but also save costs. Excess or failure will lead to cost waste, so the correct selection of precision double-axis reducer is very important.
When selecting a double-axis planetary reducer, its structural type, load-bearing capacity, reduction ratio, output speed, axial force, radial force, torsional rigidity, backlash and other internal indicators should also be fully considered during installation. Form, working conditions, working environment and other external structures. The following are the most basic requirements for selecting a reducer:
Installation dimensions: that is, the size of the front end of the servo motor. When selecting a precision double-axis reducer, the input end of the double-axis reducer must exactly match the size of the output end of the servo motor.
Reduction ratio: Motor rated output revolutions per minute/reduction ratio = how many revolutions the reducer outputs per minute. Double-shaft reducers should try to use a reduction ratio as close to the ideal as possible to ensure the ideal speed.
Torque: Servo motor rated output torque (stepper motor is holding torque) * reduction ratio double-axis planetary reducer rated output revolutions must be greater than this value. If it is less than the reducer, the service life will be seriously shortened. In this case, the shaft may be broken or the teeth may be chipped.
Return backlash: Return backlash (accuracy) r (one circle of the output shaft of the dual-axis reducer is divided into one degree and one degree = arc minute), which is what we often call the arc minute unit:. The smaller the return clearance, the higher the accuracy and the higher the cost. Users can just choose a reducer that meets their accuracy requirements. Also consider lateral/radial forces and average life. Reducers with large lateral/radial forces are relatively reliable and less prone to problems during installation and use. Usually its average life span far exceeds the life span of the servo motor it is equipped with.
Features of the dual-axis planetary reducer:
The unique multi-stage reduction ratio planetary gear reducer device with high efficiency and torque output is the best combination of precision transmission mechanisms such as servo motors and stepper motors.
Patented internal gear ring design ensures low noise during use.
The sealed full oil seal design ensures no leakage of lubricating grease.
Low-loss precision gear design and high transmission efficiency.
Suitable for easy installation of motors according to installation standards.
The smallest size among similar products, it is most suitable for limited equipment space.
High-precision double-axis reducer with low backlash - arc minute standard type - arc minute can be supplied.
The internal components of the double-shaft reducer are made of heat-treated high-strength alloy steel that is capable of handling severe and harsh working environments.
Double-axis planetary reducer lubrication:
The double-axis planetary reducer is a sealed design and does not require oil change.
The oil is a semi-solid high-grade synthetic oil
Ambient operating temperature: ~+℃
The maximum allowable temperature of the double-axis reducer body is below ℃
Note: The working temperature is below ℃ before ordering Must be clearly stated
Quality guarantee for purchasing double-axis planetary reducer:
Under normal use, the double-axis reducer is guaranteed for one year from the date of delivery.
It has a two-year oil leakage warranty under normal use.
Note: Man-made or natural disasters are not covered by the warranty.
WhatsApp
