Corner hollow shaft reducer

产地：

深圳

型号：

WPC070KL2-40-14-50

平均使用寿命：

20000小时

Corner hollow shaft reducer Hollow shaft planetary reducer Corner reducer Hollow shaft reducer Planetary reducer Corner hollow shaft planetary reducer Corner planetary reducer Precision hollow shaft reducer Bevel gear reducer Corner hole output planetary reducer Corner hollow shaft planetary reducer Reducer---With servo motor hollow shaft output planetary reducer, the output and input ends can be customized according to user requirements.
- -
.
<=_
When selecting the angle hollow shaft reducer, you should pay attention to:

Make sure your load rated torque is smaller than the angle Rated output torque of hollow shaft planetary reducer.
The rated torque of the servo motor (multiplied by) the reduction ratio is greater than the rated torque of the load.
The moment of inertia converted from the load to the servo motor through the hollow shaft planetary reducer must be within the allowable range of the servo motor.
Confirm that the accuracy of the corner hollow shaft reducer can meet your control requirements.
Lubrication of the angle hollow shaft reducer:
The angle hollow shaft reducer is a sealed design and does not require oil change.
The oil is a semi-solid high-grade synthetic oil
Ambient operating temperature: ~+℃
The maximum allowable temperature of the angular hollow shaft planetary reducer body is below ℃
Note: The working temperature is below ℃ Please specify clearly before ordering

Quality guarantee for purchasing corner hollow shaft reducer:
Under normal use, the corner hollow shaft reducer is guaranteed for one year from the date of delivery.
It has a two-year oil leakage warranty under normal use.
Note: Man-made or natural disasters are not covered by the warranty.

Installation instructions for the angle hollow shaft reducer:
The installation sequence of the angle hollow shaft planetary reducer and the servo motor:
Install the servo motor output shaft into the input of the angle hollow shaft reducer Inside the shaft
Tighten the screws (the connection between the servo and the reducer)
Tighten the screwdrivers on the left and right sides evenly
Tighten the torque wrenches on both sides
Secure the protection Plug the cover into the screw hole of the reducer
Rated torque
The rated torque is the long time of the angular hollow shaft planetary reducer (that is, the torque that can be loaded in continuous working mode).

Torque
Torque is the actual driving force for rotational motion. It is the product of the lever arm and the force. =*.

Acceleration torque ()
Refers to the maximum torque allowed to be loaded onto the output shaft for a short period of time when the working cycle is less than times per hour. For > times, r impact factor must be considered (see impact factor for details). It is a limiting parameter in the periodic work system.

Reduction ratio
Indicates that the hollow shaft reducer changes the three main parameter values of a certain movement, that is, the rotation speed, torque and inertia ratio are changed through the reduction ratio of the reducer. Change the relationship to the geometry of the transmission component to calculate the result (example: =)

Positioning accuracy
The key to accurate positioning in high-speed mechanical reciprocating motion is to minimize the angle caused by the motion. The deviation positioning accuracy depends on two values. One is the deflection angle related to the load, which involves r (torsional stiffness and return clearance), and the other is the motion-related r (synchronous deviation) problem.