Corner three-axis reducer

产地：

深圳

型号：

PM170L2-10-35-114.3

平均使用寿命：

20000小时

Corner three-axis reducer Bevel gear planetary reducer Three-axis planetary reducer Corner reducer Bevel gear reducer Three-axis reducer Planetary gear reducer Bevel gear Three-axis reducer Corner three-axis planetary reducer Three-axis servo reducer Precision three-axis reducer Axis reducer. Special angle three-axis reducer for servo motors ---. Compact structure, high torque, low backlash speed ratio, multi-stage speed ratio selection from ~ to up to four-stage gear reduction.
- -
.
Japanese servo brand: Panasonic servo motor three-axis planetary reducer Mitsubishi servo motor three-axis reducer Yaskawa servo motor angle three-axis reducer Fuji servo motor bevel gear three-axis planetary Reducer Sanyo servo motor three-axis reducer Hitachi servo motor three-axis reducer Oriental servo motor three-axis planetary reducer Omron servo motor corner three-axis reducer Tamagawa servo motor three-axis reducer Keyence servo motor bevel gear three-axis reducer Shinano servo motor bevel gear three-axis planetary reducer Toei servo motor angle three-axis reducer Miki servo motor bevel gear three-axis reducer Toshiba servo motor three-axis planetary reducer FANUC servo motor bevel gear three-axis planetary reducer Kobelco servo motor three-axis reducer Esdick servo motor three-axis reducer Yamaha servo motor bevel gear three-axis reducer Yokogawa servo motor three-axis reducer Toyo servo motor corner three-axis reducer
Corner three-axis reducer When selecting the machine, you should pay attention to:

Make sure that the rated torque of your load is less than the rated output torque of the three-axis angle reducer.
The servo motor rated torque (multiplied by) reduction ratio is greater than the load rated torque.
The moment of inertia converted from the load to the servo motor through the reducer must be within the allowable range of the servo motor.
Confirm that the accuracy of the bevel gear three-axis planetary reducer can meet your control requirements.
Three-axis reducers are widely used in: cutting machinery, printing machinery, packaging machinery, CNC machine tools, robots, manipulators, plastic machinery, medical machinery, food machinery, construction machinery, engineering machinery, lifting and transportation, mining machinery, Woodworking machinery, engraving machinery and welding equipment, communication equipment, petrochemical industry, light textile industry, instrumentation, metallurgy, automobiles, ships, railways, aerospace and other automated machinery industries.
Installation method of corner three-axis reducer:

Apply a little anti-rust oil to the motor output shaft and flange.
If there is a bushing, when placing it into the input shaft of the three-axis reducer, pay attention that the groove on the bushing must be aligned with the groove on the input shaft of the bevel gear planetary reducer.
Place the motor to be installed on the platform with the motor output axis upward, then secure the motor and remove the key.
Carefully align the groove on the input shaft of the servo three-axis reducer with the key groove on the motor and slowly slide it in.
Lock the fixing screw on the input shaft of the three-axis planetary reducer with the first torque.
Tighten the fixing screws of the motor and the three-axis reducer.
Increase the torque evenly and gradually (three times) to tighten the fixing screws on both sides of the input shaft of the planetary gear reducer.
Please do not hit the output shaft of the bevel gear three-axis reducer with gravity to avoid damaging the internal mechanism of the reducer.