Murata TSUNTIEN reducer TTRV-30C

Reducer

Features:
dd:
Novel transmission and unique advantages
Equipped with circular pin teeth in balance wheel transmission The fixed gear without a balance wheel has the advantages of harmonic gear transmission without a flexspline. It has the advantages of small tooth difference planetary transmission and large transmission ratio without interference. It has the advantages of large bearing capacity of nutation transmission without nutation transmission.
:
, smooth operation and low noise
Multi-tooth meshing
:
Large overlap coefficient
:
Balanced double-row structure mechanism
:
/> :
Rolling and side clearance
:
Avoid gear interference
:
Minimize mechanical vibration and noise
:< br/>, the transmission precision error is small
Since the multi-tooth meshing tooth errors can compensate for each other, the transmission error value is only
:%
of the gear reducer.
:
, small sliding and the highest efficiency
Since the meshing parts are all made of rollers, the whole system is basically sliding with rolling, and the mechanical loss is minimal, so extremely high gear transmission efficiency can be obtained for single-stage deceleration. The machine can reach a maximum of
:%
about
:
, large shock wave diameter and high output
Due to the characteristics of the shock wave law, the shock wave diameter of the roller wave transmission They are generally larger than other planetary transmission mechanisms, so the allowable transmission torque is also higher.
:
, large transmission ratio and compact structure
The transmission ratio is the number of rollers on the roller plate, so a single-stage transmission can obtain a large transmission ratio. The input and output force axes are located on the same axis center line The structure is streamlined and compact, and is lighter in size than gear reducers and worm gear reducers of the same condition.
:
, Multi-tooth meshing has large bearing capacity
The number of teeth meshed at the same time by double-wave structure can reach up to
:%
General gear transmission only has about
:~< br/>The bearing capacity of the teeth is larger than that of gear reducers and worm gear reducers under the same conditions.
:
The roller tooth type has the longest service life
The original movable tooth mechanism has good craftsmanship, is easy to process, and has a low cost. In addition, the true scalloped tooth type has strong cohesion and is not easy to chip. It is not only easy to maintain but also has a long life. longer.
:
, less energy consumption and better economical efficiency
Due to the large output, high efficiency, high energy loss and small workload, the long-term operation has significant economic benefits.
:
, Hollow rollers are simple to output
Some roller teeth are hollow in the low-speed ratio transmission and can directly output constant speed motion, which not only improves the transmission performance but also simplifies the constant speed output structure.
: -!>r Hollow roller reducer series
: -!>r ：Reduction ratio
: -!>r ：Reduction ratio
: -!>r ： Reduction ratio
: -!>r: Reduction ratio
: -!>r: Reduction ratio
: -!>r: Reduction ratio