220V AC power supply illumination sensor

AC powered illuminance sensor
Product model:
Product price:
Overview
The series of illuminance transmitters adopt silicon blue photovoltaic detection which has high sensitivity to weak light. As a sensor, the sensor has the characteristics of wide measuring range, good linearity, good waterproof performance, easy to use, easy installation and long transmission distance. It is suitable for various places, especially for agricultural greenhouses, urban lighting and other places. According to different measurement sites and different measuring ranges, it has good linearity, good waterproof performance, good reliability, beautiful structure, easy installation and use, and strong anti-interference ability.
Two technical parameters
Power supply voltage: AC power supply
Place of use: Outdoor/indoor
Waterproof type: waterproof/non-waterproof
Measuring range: < b >
Ten thousand (optional)
Output form: /
Maximum allowable error: %
Operating environment temperature and humidity: < b >
℃～℃%R～%R (without Liquid crystal)
Storage environment temperature and humidity:
℃～℃%R～%R (without liquid crystal)
Photoreceptor: Silicon blue photovoltaic detector with filter
Repeat Test: %
Temperature characteristics: %/℃
Wavelength measurement range: ~
Atmospheric pressure: ~
Product weight: about
Three installation methods
Wall-mounted Screw fixation
Place the illumination sensor on the mounting surface, with the photosensitive part facing the light-receiving direction, and drive the screws directly into the mounting plate.
Four power supply and communication terminal wiring methods
Positive power supply: red wire
Negative power supply or current output: yellow wire
Five precautions
Please check whether the packaging is intact and check Are the transmitter model and specifications consistent with the product you purchased? If you have any questions, please contact our company as soon as possible.
2. Before use, please confirm whether the power supply output voltage is correct, the positive and negative power supply and the positive and negative wiring methods of the product, ensure that the measured range is within the corresponding range of our company's products, and read the product manual in detail or consult our company.
⒊When installing the illumination transmitter, ensure that the light-receiving surface is clean and placed on the measured surface. Thereby providing a better guarantee
⒋It is strictly prohibited to use external pressure to stamp the light detection sensor to avoid damage to the measuring element under pressure stamping, which may affect the use or cause the sensor to be abnormal or crush the light-shielding film to cause water leakage. Do not use it in high temperature and high pressure environments.
⒌Users are not allowed to disassemble it by themselves during use, and they are not allowed to touch the diaphragm to avoid damage to the product.
⒍It is strictly prohibited for the transmitter housing to be scratched, knocked, or banged by knives or other sharp metal connecting wires and objects, which may cause water damage to the transmitter.

Contact us:
Beijing Fengsu Wind Direction Technology Co., Ltd.
Mobile:
Telephone:
:
Contact person: Ms. Zhang
WeChat: @b