Gasoline generator and welding machine

Gasoline generator and welding machine
)}}{]_~}
The welding transformer has its own characteristic of a sharp drop in voltage. After the welding rod is ignited, the voltage drops. In addition to the primary/voltage conversion, the secondary coil also has tap conversion voltage, and the iron core is used to adjust the operating voltage of the gasoline welding machine. When repairing mechanical and electrical equipment, it is often encountered that the screws of old equipment cannot be tightened. In this case, a gasoline welding machine can be of great help. The method is: adjust the current of the gasoline welding machine to the maximum voltage and the minimum voltage. Use the ground wire of the gasoline welding machine to connect to the shell. Use welding pliers to hold a carbon rod and connect it to the screw to be tightened. After powering on for a few minutes until the screw becomes hot and red, stop the machine and add some engine oil or other oil while it is still hot. Once the screw is cool, twist it and remove it.
<< :r =>Product model
:r =>
:r =>Electrode (welding rod diameter)
:r =>Normal welding. Spot welding
:r =>Current adjustment range
:r =>~
:r =>Auxiliary power supply rated power
:r =>
:r =>Auxiliary power supply backup power< br/> :r =>
:r =>DC output
:r =>/
:r =>Engine model
:r =>
:r =>Starting method
:r =>Hand start
:r =>Cooling method
:r =>Air cooling
:r =>Welding rated voltage
: r =>
:r =>Auxiliary power supply voltage
:r =>
:r =>Valve form
:r =>
:r =>Exhaust Quantity
:r =>
:r =>Ignition system
:r =>Contactless transistor ignition
:r =>Fuel tank capacity
:r =>
:r =>Unit size
:r =>**
:r =>Fuel
:r =>Gasoline
:r =>No-load voltage< br/> :r =>
:r =>Weight
:r =>
:r =>Load endurance rate
:%
:r =>After-sales service Service
:r => Suzuka Original Nationwide Warranty
:r => Quality Assurance
:r => One-year warranty and lifetime maintenance
Suzuka Power/After-sales Service
/> .Since the date of purchase (subject to the purchase certificate), if there is any major quality failure during normal use within a few days, if the machine is not in use, it will be replaced with the company's product of the same model in accordance with the national three-guarantee replacement regulations.
. For products within the three-warranty period, any quality failure caused by manufacturing, packaging, etc. that affects the integrity, safety, power and usability of the entire machine should be adjusted and repaired. The products after the warranty should be Able to achieve relevant technologies
Gasoline generator and welding machine