Ore classifier

The classifier is widely used in mineral processing plants to form a closed-circuit cycle with ball mills to separate ore sand. It can also be used in gravity concentrators to classify ore and fine mud, as well as in metal mineral processing processes to perform particle size classification of ore slurries and dewatering in ore washing operations. Mud, dewatering and other operations. The machine has the characteristics of simple structure, reliable operation and convenient operation. The classifier relies on the principle that the solid particles have different sizes and specific gravity and therefore have different settling speeds in the liquid. The fine mineral particles float in the water and the coarse mineral particles overflow and sink to the bottom of the tank. A kind of classification equipment that is pushed up by a spiral and discharged to the upper part for mechanical classification. It can filter the material powder ground out of the mill and then use the spiral blade to rotate the coarse material into the feed port of the mill to filter out the fine material. Discharge from the overflow pipe. The base of the machine is made of channel steel and the body is welded with steel plates. The water inlet head and shaft head of the spiral shaft are made of pig iron sleeves, which are wear-resistant and durable. The lifting device is divided into two types: electric and manual. ?
.> The working principle of the spiral classifier:
.> The spiral classifier relies on the principle that the solid particles have different sizes and specific gravity and therefore have different settling speeds in the liquid. Fine mineral particles float in the water and form overflows. Coarse ore particles sink to the bottom of the tank. A kind of classification equipment that is pushed up by a spiral and discharged to the upper part for mechanical classification. It can filter the material powder ground out of the mill and then use the spiral blade to screw the coarse material into the feed port of the mill to filter out the fine material. Discharge from the overflow pipe. The base of the machine is made of channel steel and the body is welded with steel plates. The water inlet head and shaft head of the spiral shaft adopt pig iron sleeves, which are wear-resistant and durable. The lifting device is divided into electric and manual.?
.> Spiral classifier structure:
.> The classifier mainly consists of a transmission device and a spiral body , tank body, lifting mechanism, lower support (bearing bush) and ore discharge valve.