Rare earth ore linear vibrating screen

Linear vibrating screen is composed of screen box, screen frame, vibration motor, vibration reduction system and frame. The linear vibrating screen uses a vibration motor as the vibration source and is fixed on the screen box. Two identical vibration motors perform self-synchronous rotation in opposite directions. The eccentric block attached to the vibration motor rotates at each instant. The component of the centrifugal force generated by the position of the vibration motor is along the throwing direction. The reciprocating motion causes the entire screen machine supported on the shock absorber to vibrate in a straight line, causing the material to be thrown up on the screen surface and move forward in a straight line at the same time. The material falls into the screen frame from the feed end and then moves forward rapidly, loosening and passing through the screen to complete the screening. Divide operations to reasonably match the screen mesh to achieve the purpose of screening. Linear vibrating screen is a small and medium-sized multi-layer screening machinery with international advanced level. It is suitable for the maximum feeding particle size of any dry material to be screened to be no larger than . It is widely used in grading or sorting powders and small and medium-sized materials such as metallurgical powders, chemicals, fertilizers, abrasives, medicines, grains, ceramics, coal, refractory materials, building materials, etc.
.>The linear vibrating screen we produce has the advantages of small size, simple and reasonable structure, high screening accuracy, fully enclosed and pollution-free, low noise, low energy consumption, convenient repair, simple maintenance, and long screen life. It can be used in single or multiple layers and can reach up to five layers. The screen frame is generally a wooden structure. If the screen holes are larger and the output is higher, the screen frame can be made of steel structure. If corrosive materials are screened, the parts in contact with the materials are made of stainless steel. The motor installation method can be divided into downward vibration type and side vibration type. The vibration absorber installation method can be divided into seat type and hanging type. Special designs can also be made according to user needs.