hammer crusher

Hammer crusher is suitable for crushing various medium-hard and weakly abrasive materials. The compressive strength of the material does not exceed 1% and the moisture content is less than %. The materials to be crushed are coal, salt, chalk, gypsum, bricks, limestone, etc. It is also used to break the fibrous structure, scrap wood, paper with strong elasticity and toughness, or break asbestos cement waste to recover asbestos fibers, etc. In addition, hammer crushers can not only be used in crushing production lines and sand making production lines, but can also replace cone crushers in mineral processing production lines.
, Characteristics of type crusher
, The working hammer head is cast using a new process and is wear-resistant and impact-resistant.
, the required granularity can be adjusted according to customer requirements.
, the hammer-breaking machine body structure is sealed, which solves the problems of dust pollution and ash leakage in the crushing workshop. The integrated structure makes it easy to transport and install.
, The overall design is beautiful, the structure is compact, there are few wearing parts, and it is easy to maintain. The chassis of the upgraded product can be flipped, making maintenance more convenient.
, Hammer crusher (hammer crusher) has the advantages of simple structure, convenient operation, high production efficiency, and low investment
, It has full impact, counterattack, and impact (rock on stone) crushing functions and high production efficiency. The wear of machine parts is small and the comprehensive benefits are significant.
, the after-sales staff of Ke Engineering Technology Co., Ltd. teaches you how to test-run the hammer crusher
, before use, check whether the various system components and auxiliary handwheels are in the correct position, and whether the fastening screws, etc. are in the correct position. Nothing loose, if everything is working it's functioning properly.
, the motor should be installed in the opposite direction to the feed port.
, check whether there is proper lubricating oil in the bearing.
During installation, the terrain should be selected based on the actual source of raw materials before installation.
, gently turn the rotor by hand to see if it is normal and whether there is any friction. If not, you can run the rotor empty and conduct a test run for half an hour.