Gypsum crusher

The vertical compound crusher is a new type of fine crushing and coarse grinding product without screen bars, which is designed by optimizing the main specifications and parameters on the basis of comprehensive domestic and foreign advanced fine crushing equipment. It can be widely used in cement. The plant's fine crushing operation of raw meal and clinker can also be used for the fine crushing operation of medium-hard materials such as dolomite, coke gemstone, lead-zinc ore, serpentine, blast furnace slag, coal gangue, phosphate rock, etc. It is especially suitable for hard limestone, Dolomite, granite, basalt and other artificial sand making or processing and crushing of highway pavement stones. It has the characteristics of large crushing ratio, low energy consumption, stable operation, simple structure, easy operation and maintenance.
.>The working principle of the vertical compound crusher:
.>The material falls vertically from the upper part of the machine into the high-speed rotating impeller. Under the action of high-speed centrifugal force, it splits with another part in the form of an umbrella and flows around the impeller. After high-speed impact and crushing, the materials will form eddy currents between the impeller and the casing. They will impact and rub against each other multiple times and be crushed. They will be discharged straight from the bottom to form a closed circuit. Multiple cycles will be controlled by the screening equipment to achieve the required results. Finished product particle size.
.>Performance characteristics of vertical compound crusher:?
.>.Simple and reasonable structure, low operating cost. Utilizing the stone-on-stone principle, wear is small.
.>.The vertical compound crusher has high crushing rate and energy saving.
.>.With fine crushing and coarse grinding functions.
.>. It is less affected by the moisture content of the material, and the moisture content can reach about %.
.>. The working noise is lower than decibel (d level) and there is less dust pollution.
.>.Suitable for crushing medium-hard and extra-hard materials. ?
.>.The product is in the form of a cube with a high packing density and minimal iron contamination.
.>.The impeller has small self-lining wear and is easy to maintain