Stone epoxy surface glue LY-10A/B

Property
/ . . This product is a liquid, solvent-free, flowing two-component adhesive. It is composed of a modified polyamine curing agent and epoxy resin as the main agent. It is mainly used for strong sealing and filling of cracks and general pores. The product has the following characteristics
/ . . Fast curing speed, strong adhesion
/ . . Colorless and transparent, good gloss, suitable for light-colored stone
/ . . Solvent-free, environmentally friendly Small impact
/ . . Good weather resistance, yellowing resistance, more suitable for indoor use
/ . . Oil-resistant, water-resistant, chemical media-resistant, wear-resistant
/ . . Enhance the surface quality of the stone , improve product yield and productivity
/ . . Excellent grinding and polishing properties
/ . . Very suitable for sandwich bonding
/ . . This product is not easy to crystallize, so it can be better Storage and use
/ . . Application fields
/ . . Mainly used in the stone processing industry to strengthen and repair cracks, small holes, blisters, ant paths, uneven unevenness on the stone surface, and improve its Surface Quality. It can also be used to reinforce fragile stone slabs with glass gauze. This product can also be used to bond other materials such as hard, steel, steel, ceramics, polyurethane, paper and wood. Used in the electronics industry to seal electronic components.
/ . . How to use
/ . . Grind the bonding part rough and remove oil, dust and other contaminants on the stone surface to keep the surface clean and dry
/ . . Preheating the stone surface can increase the permeability, accelerate the curing speed, and improve the mechanical properties of the cured product
/ . . Ratio (weight ratio) parts, parts. After weighing, mix thoroughly until the mixture is the same color. If necessary, you can add Keda Color Mixing Paste for color mixing, the maximum amount added is %
/ . . The mixture can be applied in minutes (°C), with a fine-toothed scraper or wool brush. For large-area cracks and highly absorbent surfaces, the operation should be repeated multiple times. For small cracks, the glue should be scraped back and forth to allow the glue to penetrate multiple times
/ . After about an hour at room temperature (℃), the treated surface Grinding and polishing operations can be carried out. If the natural stone slab is preheated to about ℃ and then glued, the next operation can be carried out after about an hour
/ . . The tools can be cleaned with Keda special diluent or cleaning agent
/ . . Raising the temperature will speed up the curing reaction, and lowering the temperature will delay the curing reaction
/ . . Before disposing of the empty can, the packaging can must be completely emptied
/ . .
/ . . Components Colorless and transparent,
/ . . Components are colorless or light yellow and transparent
/ . . Working time, ℃ minutes after gram sample is fully mixed
/ . . Fully cured ℃ days
/ . . Shelf life
/ . . Store in a cool place, sealed in the original container, for one year. It can continue to be used after passing the expired inspection.