Year1
- 型号：
- THO511-2
- 规格：
- 公斤装
- 包装：
- 铁罐装
> Thomas High-Strength Structural Adhesive ()
Overview
>This product is a resin-modified structural adhesive several times, two-component, cured at room temperature or heated, the product is high-gloss, Tough and dense on the inside, flexible on the outside, resistant to hot and cold shocks, has a wide range of applications and is easy to use.
Applicable
>Applicable to C/leather, polystyrene, aramid, B, EPDM rubber, polyurethane, neoprene, nitrile rubber, silicone rubber, and other rubbers, plastics and metals , ceramics, wood, composite fiber self-adhesive and mutual adhesive.
Properties
Performance
>Features
Points
>Appearance: The components are light-colored and high-viscosity paste. Component B is a colorless viscous liquid.
>Cure: At ℃, >.
reaches maximum strength. Such as heating and curing: high bonding strength, good toughness, durability and UV resistance at ℃.
>Excellent media resistance, resistant to oil, water, acid, alkali and alcoholic organic solvents. It has good storage stability and the storage period is one year at room temperature.
>Safety and toxicity characteristics: There is a slight odor, no inhalation hazard, and the glue is actually non-toxic after curing.
>The main technical performance indicators are as follows: Temperature resistance range: ℃+>>℃
(Silicone rubber/carbon steel) Rubber failure bonding strength: room temperature peel strength/shear strength. Water absorption >>℃
, R,. Then take out the test values tensile strength: Tensile bending strength Compression strength Impact toughness/* Volume resistance.c Surface resistance. Withstand voltage/shear strength. (℃). (℃) Hardness r
/>Use
> to roughen the bonded surface and wipe it clean with a wiper.
>. Fully mix the glue B according to the mass ratio:
> Apply the prepared glue evenly to the two bonded surfaces, close them together and apply appropriate pressure to compact them, and let them stand at room temperature to solidify or heat them to solidify.
Note
>Adjusting the amount of B glue can change the curing speed. B glue should be adjusted within the range of:. If there is more B glue, the curing speed will be accelerated, otherwise it will be slowed down.
>. Temperature has an impact on the curing speed. Generally, if the temperature is high, the curing speed will be accelerated. If the temperature is low, the curing speed will be slowed down.
>The pot life of the adjusted glue is at ℃, so the amount of glue adjusted at one time can reach more than one kilogram.
>Glue removal tools cannot be mixed. If the glue touches the skin, wash it off immediately with soapy water.
>. Pay attention to ventilation at the operation site. This product should be stored in a cool and ventilated place.
WhatsApp
