Year1
- 处理风量：
- 120000m3/h
- 过滤风速：
- 3.4-5.5m/min
- 过滤面积：
- 396㎡
Xianxian Yongsheng Environmental Protection Equipment Co., Ltd.
Dust removal equipment
The working principle of bag dust collector in glass factory. Dusty air enters the dust box from the bottom of the dust collector. The coarser dust settles downward by its own gravity and falls into the ash bin. The fine dust is adsorbed in the filter through various effects. The dust in the bag accumulates thicker and thicker as time goes by, the resistance of the dust collector gradually increases, and the amount of gas processed continues to decrease. In order to keep the dust collector in an effective working condition and keep the pressure loss within a certain range, it is necessary to It is necessary to remove the dust adsorbed on the outside of the bag wall.
The coal-fired bag dust collector absorbs the advantages of the original pulse bag dust collector, replaces the original ash discharge system, and simplifies the structure. It has large gas processing capacity, good purification effect, easy operation, low maintenance, and high performance. Stable and reliable operation characteristics. Compared with the mechanical vibrating silo top dust collector, it also has the characteristics of low operating noise, long service life of the filter bag, and no wear and tear of mechanical movement. It is suitable to be arranged on the top of various powder storage bins to capture various small dry particles. Non-fibrous dust is a necessary equipment for dust removal in simple warehouse.
During the dust cleaning process, the controller issues instructions to each electromagnetic pulse valve according to the specified requirements, causing the filter bag to rapidly shrink, expand, and shrink in an instant. During the dust cleaning process, the pressure loss of the dust collector and the processed The amount of dust-containing gas is almost unchanged, which is one of the advancements of the pulse bag dust collector.
WhatsApp
