Ocean King series, Ocean King NFC9112 anti-glare floodlight

Ocean King
Anti-glare floodlight,
1. Overview
Widely used for flood lighting in various devices, platforms, corridors, passages, workshops, factories and other places.
2. Performance characteristics
Using high luminous efficiency, long-life gas discharge lamp as the light source, and through advanced light distribution design and special process processing, the light is soft and uniform, no glare, the power factor > the average service life is hours or more.
Adopting optimized structural design and high-strength aluminum alloy shell, it has the ability to resist strong vibration and impact.
Corrosion-resistant shell material and surface coating treatment ensure that the lamp will not corrode or rust in harsh environments.
The light bulb can be replaced by gently flipping the transparent part, which is very convenient.
Heat dissipation ribs are added to the surface of the lamp holder shell, which increases the heat dissipation area and improves the service life of the lamp.
The lamp and electrical box are split designs, small in size, light in weight, compact and beautiful in structure, and simple and smooth in appearance. .
Various installation methods such as light poles, suspended ceilings, and booms can meet lighting needs in different environments.
3. Main technical parameters
Rated voltage/
Power factor greater than
Protection level
Anti-corrosion level
Insulation level
Pitch to height ratio
/> Cable inlet thread~
Overall dimensions Lamp body & ballast box
Weight Lamp body. Ballast box
Equipped with light source
Order number Equipped with light source rated power Average service life of luminous flux





IV. How to use
According to the site environment and lighting needs, determine the lamps and ballasts installation location and appropriate installation method. And prepare a three-core cable of corresponding length according to the distance from the ballast to the power contact.
. Fix the lamp and ballast at the determined installation position.
Use a socket wrench to unscrew the two fastening bolts on the ballast box cover, open the ballast box cover, and introduce one end of the three-core cable of the lamp through the introduction device of the ballast output port. into the ballast cavity and connect to the corresponding specified location.
. Introduce one end of the prepared three-core cable into the ballast cavity through the introduction device at the input port of the ballast box, and connect it to the corresponding specified position in the electrical box.
, close the ballast box cover and tighten the fastening bolts, and then connect the other end of the three-core cable to the power supply to achieve lighting.
When replacing a light bulb, first cut off the power supply, loosen the locking nut on one side of the lamp head, open the lamp head through the hinge flip mechanism, unscrew the old bulb, and replace it with a new one.
V. Precautions
When in use, the surface of the lamp will have a certain temperature rise. This is a normal phenomenon and the center temperature of the transparent part is relatively high and must not be touched.
. The suitable installation height of this lamp is ~ meters, and the maximum projection range is meters.
If the external flexible cable or cord of this lamp is damaged, the cord must be replaced by the manufacturer or its service agent or a person with relevant experience.
Warning: Do not install directly on combustible materials
. When installing and maintaining lamps, the power must be disconnected first
. The lamps must be reliably grounded
6. Quality Assurance
Company It has passed the international quality system audit and certification, and strictly implements the international quality management system standard production to ensure that the product quality fully meets the national standards and design requirements. The product is subject to an annual warranty (the light source is guaranteed for one year). The product can be used normally within one year from the date of purchase. If any malfunction occurs, our company will be responsible for free maintenance.