L series roller can ears are on sale now

额定电压：

11v

额定电流：

0.15A

质量：

66kg

Series of roller can lugs
,
Our company is a manufacturer of roller can lugs with many years of production experience. The roller can lug skin is made of polyurethane, which is wear-resistant and durable. The roller can lugs produced by our company Models include single-wheel can lugs, and double-wheel can lugs. Models include. etc. Our company can also customize roller can lugs according to customer requirements. For example, our company also supplies roller can lugs. Can lug accessories, such as roller can lug helixes. Welcome inquiries from mining bases and dealers across the country.
Roller tank ears are divided into single-wheel roller tank ears and double-wheel roller tank ears. Single-wheel roller tank ears are used on both sides, and double-wheel roller tank ears are used on both sides. The middle position of a single wheel.
The roller tank ears produced by our company are used to lift containers (skips, cages, counterweights) in vertical shafts to provide guidance and buffering. The roller can ear products produced by our company have high structural strength, good performance, long service life, high reliability, smooth operation, convenient adjustment and simple maintenance. The roller can lug spring is lubricated with oil, has good dynamic characteristics and stable elasticity. It is a green and environmentally friendly product vigorously promoted by the country. Roller can lugs are available in a variety of specifications to meet the various needs of customers.
There are models of roller can lugs, as well as double-wheeled ones. Our company can customize and process roller can lugs.
Structural principle of roller tank ear
The roller tank ear is a combined steel tank channel guide device independently developed by our company. The roller tank ear is mainly composed of rollers, brackets, spring buffer devices, bases, etc. The spring buffer device consists of an adjusting sleeve, an adjusting screw, a nut, a disc spring shaft, a guide sleeve, a coupling cap, a set screw, a disc spring, a flat key, a cylinder barrel, etc.
The roller tank ear buffer device adopts a disc spring group. Its working principle is that the roller is released by the vehicle through the bracket, adjustment sleeve, adjustment screw, and disc spring shaft. The up and down movement of the disc spring shaft is released and the disc spring group is compressed. buffer.
The disc spring shaft moves up and down in the guide sleeve and the guide hole at the bottom of the cylinder barrel. There is a key milled on the lower end of the disc spring shaft. The disc spring shaft cannot rotate due to the flat key at the bottom of the cylinder barrel. The guide sleeve is screwed into the cylinder and presses the disc spring shaft so that the shoulder of the disc spring shaft presses the disc spring. For safety and reliability, the guide sleeve is locked with a cap, and drilled and tapped together with the cylinder barrel, and set screws are used. Fasten.
Due to the rubber layer of the roller being worn during operation, the roller is adjusted by adjusting the screw to tilt forward and approach the tank channel. One end of the adjusting screw has a left-hand thread and the other end has a right-hand thread. Screw in the adjusting sleeve and disc spring shaft respectively. When adjusting, loosen the nut under the adjusting screw and turn the adjusting screw counterclockwise. The screw is screwed out and the roller tilts forward to approach the tank channel. After adjustment, tighten the nut under the adjustment lever.
Installation and use
Installation of roller tank ears
Connect the roller tank ears to the lifting container with bolts, adjust the position of the three roller tank ears relative to the tank channel, and ensure the clearance between the tank channel and the tank channel. consistent, the axis center line is horizontal, the radial center line is perpendicular to the tank channel surface, and then the fixing bolts are tightened.
Use of roller tank ears
According to the wear of the roller, the roller should be adjusted by loosening the screw lock nut, turning the screw to make the roller lean to the tank channel, the gap is ~, and tighten the lock after adjustment Tighten the nut.
Precautions and Warnings
Regularly check whether the top screw, nut, shaft end nut and other fasteners of the roller spindle are tight, whether the roller is loose, whether the roller is running and worn, and whether the swing frame is deformed, etc. Carry out inspection, and if any abnormality is found, the cause should be identified and restored before use.
If you find quality problems, you are not allowed to disassemble it yourself. You should negotiate with the dealer for repair or return, or you can contact our company directly.
Roller tank ears
Product description
Series of roller tank ears (coal safety certificate number,,,) are used for guide buffering of mine hoisting containers. The roller tank ears produced by our company have multiple patents (Patent No.), the technical performance is domestically leading.
This product adopts advanced sealing technology and is suitable for harsh environments such as water spray and coal dust. The wheel head installation adopts a three-locking structure to completely avoid the accident of wheel head falling off. The roller is cast with tetrahydrofuran epoxypropane copolyether polyurethane, which has the advantages of high elasticity, tear resistance, water resistance and oil resistance. The roller wear compensation adjustment adopts left-hand and right-hand screws, and the adjustment is quick and convenient. The machine base and swing frame are welded and formed from high-quality steel plates, which are small in size, light in weight and easy to install.
Contact person Feng Lianpeng
Mobile phone
Landline
Fax